Advertisement
Quick Links
Trouble shooting
ISSUE
Fixture not working
Check power supply is present
Ambient light Level sensor may be ac vated and available light level
Power ON - Fixture not
may be above se ng: Check Se ng. If desired disable Ambient Light
working
Sensor or adjust se ng (See above)
Aim Remote programmer at fixture Press SELECT and Desired Group
No Group alloca on
1-8 (Sync and Save)
Fixture remain on with no
Check power supply is present
ac vity
Fixture not ac va ng on
Mo on Sensor range and be incorrectly set. Aim Remote
movement as expected
programmer at fixture and adjust as per desired (Near/ Medium/ Far)
Fixture not turning Off
Standby Brightness se ng may be ON. Aim remote at fixture and set to OFF.
Operational Examples:
Offices Group allocation example
Carpark Group allocation example
P.8
Info@emlight.com.au
By MASTERTEC SUSTRALIA
SOLUTION
1300 436 533
emlight.com.au
A new level of simplicity in autonomous lighting management.
Installation and Operation Manual
Handheld Remote Programmer
1300 4EMLED
Doc IEDMA-A-9-2018
Info@emlight.com.au
1300 436 533
emlight.com.au
By MASTERTEC SUSTRALIA
Mastertec Australia Pty Ltd
ABN 97620666373
Advertisement
Summary of Contents for MASTERTEC SUSTRALIA ENILIGHT AutoFLEX
- Page 1 By MASTERTEC SUSTRALIA By MASTERTEC SUSTRALIA Trouble shooting ISSUE SOLUTION Fixture not working Check power supply is present Ambient light Level sensor may be ac vated and available light level Power ON - Fixture not may be above se ng: Check Se ng. If desired disable Ambient Light...
- Page 2 By MASTERTEC SUSTRALIA By MASTERTEC SUSTRALIA Safety, convenience, and energy efficiency AutoFLEX is about autonomy and flexibility. It is the simplest and most cost effective lighting solution that delivers maximum energy efficiency without compromising safety or convenience. It ensures all the light you need, when you need it, and provides full control over lighting use in unoccupied spaces.
- Page 3 By MASTERTEC SUSTRALIA By MASTERTEC SUSTRALIA Operational Overview Allocation of groups AutoFLEX autonomous lighting allows clients to have as much light as necessary when spaces Group allocation is essential, or all the fixtures will be ON when there is any activity anywhere are occupied, and as little as possible when the spaces are unoccupied.
- Page 4 By MASTERTEC SUSTRALIA By MASTERTEC SUSTRALIA 1. Opera onal Light Level Sync/ Save This is where selec ons are sent to the target groups or fixtures and saved as the opera onal se ngs. The light level is adjusted on the centre ring, le and right for minimum and maximum, up and down for fine They can be saved to all groups, to individual groups, or some mes to an individual fixture only.
Need help?
Do you have a question about the ENILIGHT AutoFLEX and is the answer not in the manual?
Questions and answers