Advertisement
Quick Links
Advertisement
Summary of Contents for Aquavolta AGE2 GO 2.8
- Page 1 GO 2.8 Hydrogen Water Generator Manual...
- Page 2 2 - What ist AquaVolta ® • The brand name Aquavolta ® derives from the latin term for water(aqua) and the name of the inventor of the battery, Alessandro Volta. It stands for electro activated water. • In Germany one originally spoke of electrolyte-water, afterwards of “activated water”.
- Page 3 3 - What does AGE GO mean? • AGE sounds in English like H , the formula for molecular hydrogen, the "gas of life", whose role in the human body was only recognized in the 21st century. ɡoʊ ˈeɪtʃ ˈtu • However, when it became clear that dissolved hydrogen was the decisive factor for the effect of electrolyte water, which until then had only been produced in alkaline water ionizers, an industry...
- Page 4 With a device for on the move it is clear: The smaller, the better. Therefore, we have designed the AquaVolta® Age Go in such a way that it does not depend on a single type of water. If you do not want to trust the existing...
-
Page 5: General Safety Instructions
5 - General Safety Instructions ➢ Stop use if water leaks out of the device. ➢ Only use the device once you have read and understood the instruction manual. ➢ Do not place the device outdoors. ➢ Before switching the device on, the water container has ➢... -
Page 6: Scope Of Delivery
6 – Scope of Delivery 1 x Pressure Bottle adapter for Replacement seal compensation 28 mm screw thread USB plug + Micro USB cable 14 cm 11 cm 2 x Production Production unit containers made of with protective cap borosilicate glass... - Page 7 7 – The two operating modes Basically the AquaVolta® AGE GO 2.8 offers two possibilities to produce hydrogen water: Either you use one of the supplied production containers made of borosilicate glass with the white pressure lid (a), or you use a mineral water bottle with a capacity of up to 1.5...
- Page 8 8 – Preparing operation mode 1 1. Remove the protective cap from the production unit 2. Remove the moisture cap. 3. The (-) electrode 4. Screw the desired (cathode) is now glass container into visible. The cathode the screw thread of 14 cm 11 cm should always remain...
- Page 9 9 – Preparing operation mode 2 6. After completing point 5, if you prefer to 5. Before the first operation, fill the glass produce in a bottle with a narrow 28 mm container with max. 60º C warm water and let thread, replace the built-in large bottle it stand for at least 2 hours to completely adapter with the supplied small bottle...
- Page 10 10 – Charging 1. Place the device on a dry, flat surface. 2. Open the rubber flap over the charging socket. 3. Plug the USB cable into the charging plug and the other end into the production unit. Before first use the battery has to be fully charged. 4.
- Page 11 11 – Producing hydrogen water With the on/off button you start the hydrogen production, which you recognize from the fine bubbles rising. 1. By pressing the button once, the LED lights up blue and the unit produces for 5 minutes. 2.
- Page 12 12 – Emptying the condensed water-tank Cleaning the interior If the condensed water tank at the bottom of the unit fills with water, it must be emptied, To do this, unscrew the tank lid with the built-in valve and shake out the water.
- Page 13 13 – External cleaning and storage. Technical data. Wipe the exterior of the unit with a damp, soft cloth. Coarse soiling can also be removed by half filling the pressure vessel with warm water and shaking vigorously. Then pour away the water used. Store the device at room temperature and not in direct sunlight.
-
Page 14: Troubleshooting
14 – Trouble shooting Problem Examining the cause Solution Booster not working • Battery charged? Connect mains adapter, plug in. • (no bubbles are produced) Foreign object in the pressure Interior cleaning P. 18 container? • LED not shining Battery charged? Connect mains adapter, plug in. -
Page 15: Service And Guarantee
Manufacturer (general importer and service centre): Garching, 7. 2. 2019 Aquacentrum, owner Yasin Akgün Münchener Str. 4A – 85748 Garching bei München www.aquacentrum.de www.aquacentrum.com Aquavolta® is a word mark protected by the German Patent and Trademark Office and the EUIPO.
Need help?
Do you have a question about the AGE2 GO 2.8 and is the answer not in the manual?
Questions and answers