Table of Contents
Advertisement
i n s E R t i o n i n s t R U c t i o n s M a n U a L
MUELLER
Improved,
Centurion
Series,
Modern
Improved,
and 107
Fire Hydrants
Inserting Extension
Sections
!
WARNING:
before working on, or disassembling the Hydrant (including removing any bolts(s) holding the Hydrant together), shut off gate valve to isolate
Hydrant from main water source. loosen (do not remove) one nozzle cap two turns and check for water under pressure inside Hydrant - bleed off any pressure, then
remove nozzle cap completely. Open Hydrant main valve completely. A continuous flow of water, no matter how slight, indicates Hydrant is not properly isolated from
the main water supply, and that problem must be corrected before any Hydrant disassembly can proceed. Disassembly of Hydrant with pressurized water acting
against the main valve could result in unexpected ejection of Hydrant parts, debris or high-pressure water stream, which could cause serious bodily injury.
®
®
table of ContentS
Centurion Series Fire Hydrant -
(All Models Prior to 1962)
(Sealed Oil Reservoir 1962 Style)
with Steel Stem Coupling
(Sealed Oil Reservoir 1962 Style)
107
®
Inserting Extension Sections - Notes
Customer Service Center
www.muellercompany.com
moreinfo@muellercompany.com
PaGe
2-3
4-5
6-7
8-9
10-11
12-13
14-15
Reliable Connections
TM
Decatur, Illinois
800.423.1323
Advertisement
Table of Contents
Need help?
Do you have a question about the Centurion Series and is the answer not in the manual?
Questions and answers