Advertisement
Quick Links
Advertisement
Summary of Contents for WATERSCIENCE Cleo SFU-717
- Page 1 USER MANUAL...
- Page 2 USER MANUAL...
- Page 3 Introduction Main Benefits Parts & Accessories Installation Cartridge Replacement Cartridge Cleaning Troubleshooting Warranty Information Medical Advise & Disclaimer Version 1.1 Copyright © 2017 Aquagenics R&D India Pvt. Ltd. All rights reserved.
- Page 4 Thank you for choosing the CLEO SFU 717 shower & tap filter from WaterScience. The CLEO SFU 717 is a versatile filtration device that can be attached to almost any bath fixture - taps, wall showers, hand showers and overhead showers.
- Page 5 90%*...
- Page 6 Most of salts wash away with water, and whatever is left behind can easily be removed with regular cleaning liquids!
-
Page 7: Parts And Accessories
Parts & Accessories Top connector Top shell Cartridge O Ring Cartridge Bottom shell Bottom connector Aerator adaptor mesh-washer washer CLEO SFU-717 fits on all standard 1/2" shower connectors and taps with 24 mm aerators. - Page 8 Installation on Wall / Overhead-showers Step 1 Disconnect your shower-head from the shower arm & clean the thread with sand paper to remove any debris. Now wrap the thread of the shower arm with Teflon tape to prevent leaks. Step 2 Ensure 2 washers are inserted into the top connector of the CLEO and wrap the bottom connector thread with Teflon tape to prevent leaks.
- Page 9 Installation on Hand-showers fixtures Step 1 Disconnect the hose from the tap & clean the thread with sand paper to remove any debris. Now wrap the thread of the tap with Teflon tape. Step 2 Ensure at least 2 washers are inserted into the top connector of the CLEO and wrap the bottom connector thread with Teflon tape to prevent leaks Step 3...
- Page 10 Installation on Taps & faucets Step 1 Remove the aerator from the faucet / tap and connect the aerator-adaptor to the tap. Step 2 Wrap the connector thread of the adaptor with Teflon tape to prevent leaks. Ensure at least 2 washers are inserted into the top connector of the CLEO.
- Page 11 Filter Cartridge Replacement Instructions Step 1 Hold the top shell of the CLEO Shower & Tap filter firmly and turn the bottom shell counter-clockwise to open the filter. Step 2 Remove the old cartridge. Insert new cartridge Red side in to the bottom shell. Remember to remove packaging stickers from both sides of the cartridge.
- Page 12 Instructions for Cartridge cleaning / reverse flushing Step 1 Hold the top body of the CLEO Shower & Tap filter firmly and turn the bottom body counter-clockwise to open the filter unit and remove the cartridge. Step 2 Gently tap the sides of the cartridge with the supplied spanner or against the wall to loosen lumps that may have formed inside.
- Page 13 SYMPTOM : Water pressure if too low for a comfortable shower right after installation. SOLUTION : The CLEO comes with a water saving flow-restrictor / mesh washer. If the incoming pressure or flow rate is low in your plumbing line, remove the flow restrictor / mesh washer ( located inside the top connector )and use a regular washer (provided in the installation kit) SYMPTOM : Water flow from the shower &...
- Page 14 Will the CLEO shower & tap filter reduce the TDS of my water? No, the CLEO is not designed to reduce TDS levels. TDS (PPM) merely means there is ‘something’ in your water - eg. if you dissolve 10g of sugar in a glass and 10g of salt in another glass, the TDS value would be similar.
- Page 17 9242 000 123 WaterScience CLEO uses patented KDF technology tested and certified for chlorine removal by the National Sanitation Foundation (NSF) who is a US water supply auditor and World Health Organization member.