Plug Wiring - Beko CEG5331X User Manual

Fully automatic espresso machine
Hide thumbs Also See for CEG5331X:
Table of Contents

Advertisement

1 Important instructions for
safety and environment

1.9 Plug Wiring

The moulded plug on this appliance incorporates a 13 A fuse. Should the
fuse need to be replaced an ASTA approved BS1362 fuse of the same rating
must be used. Do not forget to refit the fuse cover. In the event of losing the
fuse cover, the plug must not to be used until a replacement fuse cover has
been fitted. Colour of the replacement fuse cover must be the same colour
as that visible on the pin face of the plug Fuse covers are availabe from any
good electrical store.
• Fiting a different plug
• As the colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals on your
plug, proceed as follows:
• Brown cable = L (Live)
• Blue cable = N (Neutral)
• Green/yellow cable must be connected to ground (E)
• With the alternative plugs a 13 A fuse must be fitted either in the plug or
adaptore or in the main fuse box. If in doubt contact a qualified electrician.
22 / EN
Fully Automatic Coffee Machine / User Manual
line

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents