Table of Contents
Advertisement
Quick Links
BTI-029 Toslink / SPDIF Bluetooth
Transmitter & Receiver
Welcome to use Toslink / SPDIF Bluetooth transmitter & receiver BTI-029
➢ Production description:
BTI-029 is a Bluetooth transmitter and receiver with Toslink.
When used as a Bluetooth transmitter, it can transfer the music on your mobile, Walkman,
TV, computer, etc to your Bluetooth receiver, Bluetooth headphone, and Bluetooth
speakers through wireless technology.
When used as a Bluetooth receiver, it can been a stereo Bluetooth headphone (by
plugging headphone audio cable into 3.5mm port), or connecting with speaker to receive
audio signal through wireless.
Pls enjoy your time to use this model!
➢ Image & Specification
Advertisement
Table of Contents
Summary of Contents for Dynamix BLUECAST-2
- Page 1 BTI-029 Toslink / SPDIF Bluetooth Transmitter & Receiver Welcome to use Toslink / SPDIF Bluetooth transmitter & receiver BTI-029 ➢ Production description: BTI-029 is a Bluetooth transmitter and receiver with Toslink. When used as a Bluetooth transmitter, it can transfer the music on your mobile, Walkman, TV, computer, etc to your Bluetooth receiver, Bluetooth headphone, and Bluetooth speakers through wireless technology.
- Page 2 A, Multi-function button (MFB) B, Mode selection switch (TX: transmitter; RX: receiver) C, Interface selector switch (AUX: 3.5mm audio interface; SPDIF: optical interface) 3.5mm Aux-in E, Optical fiber input interface F, Optical fiber output interface G, Micro USB charging port H, LED indicator Model No BTI-029...
- Page 3 A. Connect the charging cable with a AC or PC with the USB port B. Connect the charging cable with BTI-029 with micro USB port C. Solid Red LED indicator when charging, and turn off when full charged. D. Take about 2 hours. ➢...
- Page 4 5.Re-connect with all the connected device: Power on the unit ( two connections simultaneously ), short press MFB to connect back with all the paired devices automatically (support two devices connection simultaneously, prioritize the latest two ones). Solid blue LED to successful connected. Enter into pairing mode if without connected with any devices more than 22 seconds.
- Page 5 1. Power on: Off state, long press MFB for 3 seconds, Blue LED flashes twice to power on. (BTI-029 enter into pairing mode automatic if without connect with any device before.) 2. Power off： On state, long press MFB for 3 seconds, Red LED flashes twice to power off. (Please repower the unit after 3 seconds later, as voltage of the chipset may not disappear totally.
- Page 6 8. Working while charging: Support working while charging to continue work. (with DC 5V ≥300mA,) Steps: 1.Connect the unit with power supply. 2.Power on item BTI-029 to enter into pairing mode. 3.Connect with devices and work. Tips: 1. May have noise when the battery voltage too low or with poor power supply. 2.
- Page 7 4. Successful connection, power off device A and BTI-029, and paired Device B with BTI-029 (following the same pairing steps ) 5.After successful connection with device B, power off BTI-029. 6. Power on device A, around 10-20 seconds later. Then power on the BTI-029 (no need to enter into pairing mode), it will search and connect with device A and B automatically, the pairing time will take around 30 seconds.
-
Page 8: Battery Information
2. If BTI-029 couldn’t connect with the Bluetooth headset or speaker after more than 1 minutes. Please try to clear up the pairing lists of BTI-029 to save time for pairing, please repower the BTI-029 after clear up the pairing list. ➢...
Need help?
Do you have a question about the BLUECAST-2 and is the answer not in the manual?
Questions and answers