GRASS Kinvaro T-65 Mounting And Adjustment Instruction

Advertisement

Quick Links

GB
Dear Customer,
In order to guarantee smooth and safe operation at all times, the installation instructions must be
followed exactly. Should you have any questions, please do not hesitate to contact us.
Yours, Hetal Werke

Application range

Flap weights

From pine (0.45 kg/dm
) without handle, to MDF material (0.85 kg/dm
3

Yellow spring

Cabinet
Flap
height
weight
incl. handle*
in mm
in kg
(up to flap width of 600 mm / spring must be mounted left side)
250
0,9 – 2,1
300
0,7 – 1,7
250
1,8 – 4,2
300
1,4 – 3,4
350
1,0 – 2,9
400
0,8 – 2,5
450
0,7 – 2,2
500
0,6 – 2,0

Black spring

Flap
Cabinet
weight
height
incl. handle*
in kg
in mm
250
2,4 – 7,4
300
2,0 – 6,3
350
1,7 – 5,4
400
1,5 – 4,7
450
1,3 – 4,2
500
1,3 – 3,9
550
1,3 – 3,4
600
1,3 – 3,1
° Bar handles must be included in the flap weight calculation at 0.15 kg per 100 mm handle width.
* Smaller flap widths possible (on request)
In the upper and lower borderline areas, we recommend performing a trial mounting prior to series production.

Exchanges of springs:

The spring attachment is brought into the end position by turning the adjustment screws to the left.
The fitting should be completely opened when exchanging the springs.
Mounting and adjustment instruc-
tion of flap fitting Kinvaro T-65
with 0,45 kg/dm
3
(e.g. pine)
with small
with bar
handle
handle*
yellow spring mounted one-sided
400 – 600
300* – 550
300* – 600
300* – 400
yellow spring mounted on both sides
800 – 1200** 450 – 1100 500 – 1200** 400 – 900
550 – 1200** 350 – 800
350 – 950
300* – 600
300* – 700
300* – 450
300* – 550
300* – 400
300* – 450
300*
with 0,45 kg/dm
3
(e.g. pine)
with small
with bar
handle
handle*
1100 – 1200** 800 – 1200** 800 – 1200** 550 – 1200** 600 – 1200** 450 – 1200**
800 – 1200** 500 – 1200** 550 – 1200** 400* – 1200** 450 – 1200** 300 – 1000
550 – 1200** 350 – 1150 400 – 1200** 300* – 900
450 – 1200** 300* – 900
350 – 1000
300* – 750
300* – 900
300* – 650
300* – 700
300* – 600
** Larger flap widths possible (on request)
), 19 mm thick, with bar handle.
3
Flap width in mm
with 0,65 kg/dm
3
(e.g. chipboard)
with small
with bar
handle
handle*
300* – 600
300* – 450
300* – 450
300* – 300
400 – 900
300* – 650
300* – 650
300* – 450
300* – 500
300* – 350
300* – 400
300* – 300
300*
Flap width in mm
with 0,65 kg/dm
3
(e.g. chipboard)
with small
with bar
handle
handle*
300* – 950
300* – 700
300* – 750
300* – 600
300* – 600
300* – 450
300* – 500
300* – 400
5
with 0,85 kg/dm
3
(e.g. MDF)
with small
with bar
handle
handle*
300* – 500
300* – 350
300* – 350
450 – 1000
350 – 750
300* – 700
300* – 500
300* – 500
300*400
300* – 350
300* – 300
300*
with 0,85 kg/dm
3
(e.g. MDF)
with small
with bar
handle
handle*
300 – 950
300* – 750
300* – 700
300* – 600
300* – 550
300* – 450
300* – 450
300* – 400

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Kinvaro T-65 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for GRASS Kinvaro T-65

  • Page 1 Mounting and adjustment instruc- tion of flap fitting Kinvaro T-65 Dear Customer, In order to guarantee smooth and safe operation at all times, the installation instructions must be followed exactly. Should you have any questions, please do not hesitate to contact us.
  • Page 2 Drilling holes in side panels of Kinvaro T-65 cabinet carcass Left hand side panel (Right hand side panel mirror image) Opening angle 100° Attachment at side top panel panel: 4 x Countersunk Euro screws * These drilling holes can be used...
  • Page 3 Drilling holes for wooden flap/ aluminium frame flap Attention! Assemble the fitting only in open condition!!! Drilling holes for wooden flap and for wide aluminium frame flap (min. 45 mm) Flap indicated Fastened with chipboard screws ø4mm / 2x overlay side 19 + overlay side Drilling holes for 19 mm aluminium frame flap (lateral overlay 12-17 mm) top panel...
  • Page 4 Adjusting the Kinvaro T-65 to the flap weight Flaps can be opened to a maximum angle of 100 degrees with the flap fitting Kinvaro T-65. With the correct spring adjustment, the flap stays open in all positions from an ope-...

Table of Contents