Advertisement
Quick Links
Advertisement
Summary of Contents for EFB Elektronik GmbH Infralan Security
- Page 1 Kamera Dome Network Camera Quick guide...
- Page 2 -Operate the network camera only with a suitable voltage source. -Operate the network camera only under the environmental conditions recommended by the manufacturer. The conformity has been proven, the corresponding declarations and documents are deposited with the manufacturer: EFB Elektronik GmbH, Striegauer Str. 1 33719 Bielefeld - Germany...
- Page 3 Regulatory information EU Conformity Statement This product and, if applicable, the accessories supplied with it bear the „CE“ mark and comply with the applicable harmonized European standards, which are listed in the Low Voltage Directive 2006/95 / EC and the EMC Directive 2004/108 / EC.
- Page 4 Description...
-
Page 5: Installation
2 Installation... - Page 8 3 Configure via LAN Note: In order to access and configure the network camera in the LAN, it must be in the same subnet as your PC. Then install the IDM (Infralan Device Manager) software to find and configure the IP address of the network camera.. ...
- Page 9 Search for active online devices After starting, the IDM software automatically scans the subnet of your computer every 15 minutes Online devices Figure 3-2 Search for online devices View device information Steps: Select the desired device in the device list (see Figure 3-3).
- Page 10 In the Password box, type the password fort he device administrator account, and then click Save to save changes. Figure 3-3 Selection of equipment 3. Enter the IP address of the network camera in the address field of the web browser to access the live image.
-
Page 11: Change The Ip Address
Change the IP address Um To view and configure the camera through a LAN, you must connect the network camera to the same subnet as your computer. Then install the IDM software or client software to search for and change the IP address of the network camera. The modification of the IP address is described, for example by means of the IDM software. - Page 12 Enter the password to enable your changes to the IP address. The IDM Software supports stacking of IP addresses. For more information, see the User Guide.
-
Page 13: Access Via Web Browser
4 Access via web browser Steps: 1. Open the web browser. 2. Enter the IP address of the network camera (for example 192.168.1.245) in the address fieldand press Enter to enter the login dialog. 3. If you do not have access to the camera via the web browser, please repeat the step in chapter 3. - Page 14 7. Open the web browser after installing the plug-in and repeat steps 2-4 to log in. 8. This makes the camera ready for use. COPYRIGHT © 2017 EFB Elektronik GmbH EFB Elektronik GmbH Striegauer Straße 1 33719 Bielefeld - Germany...
Need help?
Do you have a question about the Infralan Security and is the answer not in the manual?
Questions and answers