Advertisement
Quick Links
Advertisement
Related Manuals for X-TREME Monitor Series
Summary of Contents for X-TREME Monitor Series
- Page 1 MONITOR LINE Monitor Line User’s manual...
-
Page 2: Table Of Contents
X-Treme’s business unit (just think of the raised X-Treme logo). The new X-Treme monitors are not only fine looking, but the are also extremely steady, always literally “fastened down to the stage”. They... -
Page 3: Directivity
User’s manual 3. DIRECTIVITY 4. GUIDELINES FOR USING PASSIVE MONITORS: STANDARDS AND PRECAUTIONS The chart above shows the amplitude of the output sound beam in re- lation to the frequency of the XTMON12 (passive), measured at Sound The Monitor Line is a series of passive and amplified products. The Corporation’s R&D laboratory in virtually anechoic conditions (calcu- passive versions have passive crossover filters with equalisation and lation of the impulse response and rejection of reflections). -
Page 4: Amplification And Constraints
RMS power cannot be exceeded for long periods. This is the job of the limiters contained 1.5 mm 17 m 34 m in the amplified versions of the Monitor Line and the X-Treme XTDP 2.0 mm 22 m 44 m external processors. -
Page 5: Xt-Net
6.1 XT-NET management functions The X-Treme self-powered monitors are designed with a basic sound consisting of 2 internal presets that can be selected with the appropri- ate switch 1 on the back of the speaker. -
Page 6: Sensitivity
6.2 Sensitivity the speakers connected to the network in two ways: The sensitivity of X-Treme active monitors is set at 4 dBu, fixing at 0 dB 1) downloading a .dfa file released by X-Treme Audio in order to effect the software volume and flat the EQs. - Page 7 X-Treme Audio reserves the rights to change or modify products and specifications at any time without prior notice. X-Treme and the corresponding symbols, images and registered trademarks are of exclusive property of Sound Corporation group. © 2010 Sound Corporation group. All rights reserved.