Using The Meter Counter - HP Indigo Series User Manual

Table 1-3. Web tension controller settings
Substrate thickness
12 - 50 µm
50 - 150 µm
150 - 250 µm
Table 1-4. Pressure-tension conversions
Pressure
0 bar
1 bar
2 bar
3 bar
4 bar
5 bar
6 bar

Using the meter counter

The counter enables you to measure the amount of substrate that has been rewound. The
counter displays all values in meters.
From the counter, you can do the following:
EN
To set the preset value, press the UP button for the digit that you want to increase.
To reset the counter value, press RESET.
To enable and disable the counter keypad, press LOCK.
Figure 1-9. Counter
3
1 Counter value
2 Preset value
3 UP buttons for the six digits of
the preset value
Web tension controller setting
2
1 - 2 kg/cm (0.5 bar)
2
2 - 5 kg/cm (1.0 - 2.5 bar)
2
4 - 7 kg/cm (2.0 - 3.5 bar)
Tension
2
0.5 kg/cm
2
2.2 kg/cm
2
4.1 kg/cm
2
6.1 kg/cm
2
8.0 kg/cm
2
10.0 kg/cm
2
11.9 kg/cm
1
2
Adjusting the substrate tension 9