Quick-Start Guide - miniDSP HA-DSP User Manual

2 Q - G
UICK START UIDE
Quick-start for audio listening:
1. Check that the rear panel switch is set to position 2.
2. Connect an audio source to the analog input. (If connecting to the digital optical input or to the micro-USB
port, see Section 3.)
3. Connect your headphones to the headphone output.
4. Turn on the HA-DSP with the volume knob. Leave the volume knob at a low level at this point.
5. Wait until one of the LEDs on the front panel of the HA-DSP turn on. Start playing audio from your source.
6. Gradually turn up the volume knob.
If connected over USB to an Android device, use the miniDSP HA-DSP Controller app for access to additional
features of the HA-DSP. For full access to all of the advanced features of the HA-DSP, install the HA-DSP-CF
plugin on a Windows or Mac computer.
8
miniDSP Ltd, Hong Kong / www.minidsp.com / Features and specifications subject to change without prior notice