Spygeargadgets SG-HC400 Quick Start Manual

Product Diagram Introduction
SpygearGadgets
®
Congratulations on your purchase of the SpygearGadgets 1080P
1080P Full HD AC Adapter
Full HD AC Adapter USB Charger Hidden Camera (HC400). This
USB Charger Hidden Camera easy to use unique device provides covert video surveillance for
any situation. Please read through this manual in its entirety and
Model #SG-HC400
keep it handy as it explains the operations of the camera.
USB Port
Getting Started
The HC400 is a self recording camera that records video to a
micro SD card up to 128GB in capacity. For best performance, we
recommend using a name brand Class 10 rated or above memory
card. To get started, first slide off the back cover, and insert the
micro SD card into the hidden card slot until it snaps into place.
Reset
Then replace the back cover, and the camera is ready to go.
Motion Record ("D")
Recording Video
Power On/Off ("A")
To turn the camera on, make sure a memory card is inserted, and
plug the adapter into any standard 110v or 240v outlet. Next,
Continuous
press the Power Button ("A") on the remote. The device will beep
Record ("C")
once, which indicates that the device is now powered on and in
motion detection mode. Whenever motion is detected nearby, the
camera will start recording. In motion detection mode, video clips
are 3 minutes long. One motion stops, the camera will return to
standby mode, waiting to detect motion to occur again.

QUICK START GUIDE

To turn the camera off, press the Power Button ("A") again, the
device will beep twice, and then is powered off. Be sure to turn the
camera off using the remote before disconnecting the camera
Micro SD Card Slot
from power so that the last video file is saved properly.
01 02