Delta mDCC-100 Operating Instructions Manual page 7

4.3 Press MODE key (Fig. 1/) to choose MODE-B (Fig. 2) where abnormal cell particles
(Blast, Myelo, Metamye, Band, Plasme and Extra) are counted by pressing the respective
key given below each cell particle's name.
MODE-B is indicated by a glow of red led light (Fig. 2/).
4.4 Using the respective key under MODE-A and MODE-B, count the cell particles.
The sum total of each cell particles is shown on the upper right corner TOTAL: 000
(Fig. 1/).
4.5 After every TOTAL: 100 (Fig. 1/) count the unit gives a long beep sound signal.
Digital differential cell counter μDCC-100
Operating instructions
1
Fig. 2 MODE-B (ABNORMAL CELL PARTICLES)
Page 7