METAL SUPREME TD08 Instruction Manual

INSTRUCTION MANUAL
INDUSTRIAL BLENDER - TD08-16128-700
* Please read these instructions carefully before operation this appliance.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be observed
including the following:
- Before connecting your blender check if voltage of your power system
corresponds to the same specified on the appliance.
- To protect against risk of electrical shock, do not put cord, plug, base or
motor in water or other liquids.
- Never connect two or more appliances in the same power outlet.
- When not in use, unplug the blender.
- Avoid starting blender empty.
- Avoid contact with moving parts because blades are sharp. Handle carefully.
- Keep hands and utensils out of container while blending to prevent the
possibility of severe personal injury and or damage to blender. A plastic spatula may be
used but only when blender is "NOT RUNNING".
- Only remove the container when blender "COMPLETELY STOPPED".

INSTRUCTIONS FOR USE

- Blender control is made by switch ( ON - OFF)
- It is recommended to cut food in small pieces and maintain food below frieze
height to avoid spilling.
- To start blender place small quantity of food before connecting it, and afterwards complete
container.
- When blender is running do not remove the lid.
- If blender action stops, turn blender off. Remove lid and use a plastic spatula
to push mixture toward blades. Replace lid and continue.

CLEANING PROCEDURE

- Clean container (cup) with liquid soap and water filling to half capacity.
- Turn on blender for some seconds.
- Turn off blender, empty the container and rinse it.
- Unplug blender clean body and external cup with a wet cloth.
- Do not use harsh detergent or chemical products for cleaning.
- Never use water jet or immerse appliance in water.
- Wipe off appliance switch using a dry cloth and wait at least half an hour before re-
conneting to the main power outlet.
METAL SUPREME, LLC
3705 NW, 115th Ave Unit 8
Doral, FL 33178
metalsupremellc@gmail.com
(786) 536 9960
TD08
TD08
TD08-16128-700