Parts Included:
1.
Pre-Assembled Top Plate w/ 15A / 125V duplex
receptacle and pre-stripped electrical building wire
2.
Bottom Plate with easy push-in connectors
3.
6 ft. extension cord w/ 360º rotating flat head
Use the Flat Panel TV Cable Organizer Kit to install power and low voltage cables behind your flat panel TV, amplifier, or other
audio and video devices to your equipment, your equipment room or other location.
Flat Screen TV
Receptacle
IMPORTANT INSTRUCTIONS:
• Always follow local electrical code when installing this product.
• The electrical parts in this kit are designed to be used only as a kit and none of these electrical parts are designed to be used individually.
• This product is not designed to be part of your home or a commercial building's electrical wiring system.
• This installation is only energized (electrically active) when the supplied 6 ft. cord is plugged into the recessed straight blade inlet (located
on the recessed low voltage cable plate) and the straight blade end of the 6 ft. cord is plugged into either your surge protector or wall receptacle.
If you are not familiar with home wiring systems, please call a qualified electrician to install this product.
IMPORTANT INSTRUCTIONS:
This product is designed for retrofit work only because the electrical outlet box cannot be attached to a stud.
Installation Instructions for Retrofit Work Only:
Select the location of your flat panel TV mounting bracket. Next, select the location for both the top and bottom plates.
CAUTION: - Risk of Fire - Do not install Power Supply Cord within the Wall Cavity.
CAUTION: - Risk of Fire and Shock. No not connect this box to any other circuits or outlets.
Instruction/Installation Sheet
CE Tech No. 5623-WH Flat Panel TV Cable Organizer Kit
Concealed Wiring
(hidden in wall)
Receiver
MADE IN CHINA
HECHO EN CHINA
DISTRIBUTED BY
DISTRIBUIDO POR
HOME DEPOT U.S.A., INC.
2455 PACES FERRY RD., N.W.
Concealed Wiring
(hidden in wall)
Page 1 of 5
FOR ASSISTANCE, CALL:
SI NECESITA AYUDA,
LLAME AL:
1-800-394-7519
HOMEDEPOT.COM
Tools Needed:
1.
Drywall Saw
2.
6 ft. Tape Measure
3.
Pencil
4.
Phillips Head Screwdriver
Flat Screen TV
Receiver
Receptacle
10/29/15