Table of Contents
Advertisement
Operating Instructions
Metal detector
GLS
We reserve the right to change the con-
tents due to product innovation or tech-
nical improvement.
Please state type of equipment and se-
rial number when contacting us.
Please read these instructions and keep
the manual safe!
Please observe and follow the safety
notes!
S+S Separation and Sorting Technology GmbH
Regener Straße 130
Telephone: +49 8554 308-0 * Fax: +49 8554 2606
E-mail: info@se-so-tec.com
Internet: http://www.se-so-tec.com
Service: Telephone: +49 8554 308-180
* D-94513 Schönberg
1
GLSII-BA-EN-0106.doc
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for S+S GLS 350/150 GENIUS+
- Page 1 Please read these instructions and keep the manual safe! Please observe and follow the safety notes! S+S Separation and Sorting Technology GmbH Regener Straße 130 * D-94513 Schönberg Telephone: +49 8554 308-0 * Fax: +49 8554 2606 E-mail: info@se-so-tec.com Internet: http://www.se-so-tec.com...
- Page 2 Manufacturer: S+S Separation and Sorting Technology GmbH D-94513 Schönberg, Germany Contact: S+S Separation and Sorting Technology GmbH Regener Straße 130 D-94513 Schönberg, Germany Tel.: +49 8554 3080 Fax.: +49 8554 2606 E-mail: info@se-so-tec.com Internet: www.se-so-tec.com Represented by: GLSII-BA-EN-0106.doc...
-
Page 3: Table Of Contents
Contents Contents General notes Introduction Fields of applications Application reasons System identification Symbols used Important functional notes Overall view Design and method operation Functional principle Functional elements Combination scopes Dimensions and technical data Technical data sheet, see annex Interfaces, see technical data sheet in the annex Environmental conditions for operation, storage, and transport Noise levels Safety... - Page 4 Contents Spare parts Spare parts drawing Spare parts list Shipping, preservation, waste disposal, transport, storage Shipping, preservation, waste disposal Transport Storage Annex...
-
Page 5: General Notes
The texts and illustrations in this instruction manual are for the exclusive purpose of explaining how to operate and handle the GLS metal detector. S+S accepts no responsibility for damage resulting from the use or misuse of this equipment. All appropriate safety rules and regulations for the use of this equipment must be adhered to. -
Page 6: Important Functional Notes
1. General notes 1.6 Important functional notes The GLS metal detector offers best possible reliability for the detection and separation of metal con- taminations. Despite detection, however, the following circumstances still may be the cause for not separated metal particles: Occurrence of metal conglomerations, i.e. -
Page 7: Design And Method Operation
2. Design and method of operation Design and method operation 2.1 Functional principle The material to be inspected (bulk or lump material) passes the detector head (2) on a belt conveyor (1). The lower part of the belt can be put also through the detector head (3). The material is penetrated within the aperture of the detector head by a high frequency electro- magnetic field, which is generated by the control unit and the transmitter coil. -
Page 8: Functional Elements
2. Design and method of operation 2.2 Functional elements (1) Mounting elements for installation (2) Coil connection box (3) Connection cable for electronic unit Options: (4) Signalling device 2.3 Combination scopes Different Control units can be used to control the detector head: GENIUS+, PRIMUS or SENSITY. -
Page 9: Dimensions And Technical Data
3. Dimensions and technical data Dimensions and technical data 3.1 Technical data sheet, see annex 3.2 Interfaces, see technical data sheet in the annex 3.3 Environmental conditions for operation, storage, and transport The environment of the metal detector should be free of vibrations, of other influencing magnetic fields, of chemical vapours such as softeners, chlorine, and similar substances. -
Page 10: Safety
4. Safety Safety S+S equipment conforms with all official technical safety regulations. However, as a manufacturer we believe it is our duty to make you aware of the following information. The following safety and danger notes are intended for your protection, for the protection of third parties, and for the protection of the equipment. -
Page 11: Safety Information For Storage And Transport
4. Safety 4.6 Safety information for storage and transport Always observe the information in paragraph 9 to avoid any transport damage and per- sonal injuries. 4.7 Notes on residual risks Electrical circuits may still be live even after having been isolated from the mains. Switch off immediately if a fault occurs. -
Page 12: Commissioning
5. Commissioning Commissioning 5.1 Mechanical installation Use only enough stable lifting harnesses for big and heavy detector heads. Take care for a stable and vibrationproof mounting! Metal-free zone must be strictly observed! Within the metal-free zone no metallic parts must be situated. For moving metal parts (pusher) the metal-free zone extends. - Page 13 Control unit mounted apart of the detector head: Changes of the connection cables between the detector head GLS and the control unit must be reconfirmed by S+S. Only original cables must be used otherwise the CE-certification become unvalid. The connections cable must be installed separate from other power and control lines and carefully fixed or layed into a cable duct.
-
Page 14: Connections
5. Commissioning 5.2 Connections If the connection cable between detector head and control unit has been removed reconnect it accord- ing to the sketch: 5.2.1 Control Unit PRIMUS / SENSITY Electrical work should only be carried out by qualified personnel. Before removing cover plates etc make sure the equipment is isolated from mains or external voltage. -
Page 15: Errors And Fault Rectification
6. Errors and fault rectification Errors and fault rectification If you should have any questions, or if there should be any malfunctions, please contact the manufacturer. If you have any questions, please state the equipment type and serial number ! Service telephone: +49 (0) 85 54 - 30 8-180... -
Page 16: Maintenance And Cleaning
7. Maintenance and cleaning Maintenance and cleaning Prior to any maintenance and cleaning work, disconnect the device from the mains supply. 7.1 Maintenance Although the GLS is maintenance-free, it is useful to check the equipment periodically: Check for loose bolts or nuts at the plastic bars Remove any objects laying on the detector head Remove any objects in the detector passage between slide and detector (remains of bulky goods or accumulated dust) -
Page 17: Spare Parts
8. Spare parts Spare parts If you should have any questions please state equipment type and serial number! Spare parts and wearing parts must always be obtained from the manufacturer of from a supplier that is certified by the manufacturer. 8.1 Spare parts drawing 8.2 Spare parts list Item... -
Page 18: Shipping, Preservation, Waste Disposal, Transport, Storage
9. Shipping, preservation, waste disposal, transport, storage Shipping, preservation, waste disposal, transport, storage 9.1 Shipping, preservation, waste disposal Choose packing that is suitable for the type and size of unit, taking into account whether the shipment is for export by sea or airfreight, or for national or international road transport The packing material must protect the goods from all damage under normal transport conditions. -
Page 19: Transport
9. Shipping, preservation, waste disposal, transport, storage 9.2 Transport • In order to avoid injury or damage to the unit it must be handled properly. In addition to following the instructions below, general health and safety good practice and specific accident prevention guidelines should be observed. -
Page 20: Annex
10. Annex 10 Annex • Technical data sheet • Installation suggestions for tunnel metal detectors • Circuit diagrams, wiring diagrams, etc. • Signalling device (option) operating instructions... - Page 21 Data sheet Tunnel metal detector GLS 350/150 GENIUS+ Customer: S+S USA Tucker Order-No.: VAB046806/034 Project: Contact: Sabrina Bergmann Offer-No.: Date: 21.01.2011 Frequency range Control unit set off [mm] Passing width DB = [mm] Passing height DH = [mm] Coil width...
- Page 22 Data sheet Tunnel metal detector GLS 350/150 GENIUS+ Customer: S+S USA Tucker Order-No.: VAB046806/034 Project: Contact: Sabrina Bergmann Offer-No.: Date: 21.01.2011 Conditions of use Use: Inspection of bulk and piece materials on a belt conveyor or material chute (see data sheet installation instructions for tunnel metal detectors DLS / GLS)
- Page 23 S+S sales representa- tives. Subject to change withou t notice ! 09-09-17 S+S Separation and Sorting Technology GmbH • Regener Str. 130 • D-94513 Schönberg • Germany Tel. +49(0)8554/308-0 • Fax: +49(0)8554/2606 • e-mail: info@se-so-tec.com • Internet: www.se-so-tec.com...
- Page 24 Side view of the detection coil: Conveyor belt and sliding plate arrangement Subject to change withou t notice ! 09-09-17 S+S Separation and Sorting Technology GmbH • Regener Str. 130 • D-94513 Schönberg • Germany Tel. +49(0)8554/308-0 • Fax: +49(0)8554/2606 • e-mail: info@se-so-tec.com • Internet: www.se-so-tec.com...
- Page 25 (under 80°), lapping (usable) overlapping (preferred) Subject to change withou t noti ce ! 09-09-17 S+S Separation and Sorting Technology GmbH • Regener Str. 130 • D-94513 Schönberg • Germany Tel. +49(0)8554/308-0 • Fax: +49(0)8554/2606 • e-mail: info@se-so-tec.com • Internet: www.se-so-tec.com...
- Page 26 Pay also attention to the corresponding storage, mounting and commissioning instructions Subject to change withou t notice ! 09-09-17 S+S Separation and Sorting Technology GmbH • Regener Str. 130 • D-94513 Schönberg • Germany Tel. +49(0)8554/308-0 • Fax: +49(0)8554/2606 • e-mail: info@se-so-tec.com • Internet: www.se-so-tec.com...
- Page 27 Without content Material certificate conform to EN 10204 Subject to change without notice ! 10-12-07 S+S Separation and Sorting Technology GmbH • Regener Str. 130 • D-94513 Schönberg • Germany Tel. +49(0)8554/308-0 • Fax: +49(0)8554/2606 • e-mail: info@se-so-tec.com • Internet: www.sesotec.com...
Need help?
Do you have a question about the GLS 350/150 GENIUS+ and is the answer not in the manual?
Questions and answers