SELECT
Standard Vent and Direct Vent Gas Water Heaters
Low Lead Compliant
For more information on State Select® contact:
State Water Heaters
500 Tennessee Waltz Parkway, Ashland City, TN 37015
800-365-0024 Toll-free
www.statewaterheaters.com
SMGSS01207
MANUFACTURED
®
HOUSING
Complies with HUD Standards for Manufactured Housing
Installation. Design-Certified by CSA International -
Meets the Federal Energy Efficiency Standards effective January 20, 2004, according to the
National Apliance Energy Conservation Act (NAECA) of 1992
Standard Vent Models are FVIR Compliant
Gas Control Is Convertible for Natural and Propane Gas -
For flexibility to meet the varying needs of Manufactured Housing installations.
Side-Mounted 3/4" Cold Water Inlet
when cold water supply originates below the structure. Top-mounted 3/4" hot water outlet.
Direct Vent Models Packaged with Bottom Intake Air Vent -
To draw all combustion make-up air from outside the structure.
Optional Ducted Air Inlet Kit for Direct Vent Models -
water heater is installed over a basement. Provision for horizontal air inlet ducting up
to 30 feet, using Schedule 40 PVC pipe. Kit includes 45° rodent-proof termination
cap and wall collars. Kit #9002986005 for 30 and 40-gallon models. Kit #9002987005
for 50-gallon models.
Approved Roof Jack Kits Required for Installation of
Direct Vent Models -
Four kits available to accommodate vertical vent distances from 12" to 96"
(see back of sheet).
Green Choice® Eco-Friendly Gas Burner -
emissions by up to 33% and complies with air quality management districts with similar
requirements for low NOx emissions.
Glass-Lined Tank -
Anode Rod -
CSA Certified and ASME Rated T&P Relief Valve
®
Maximum Hydrostatic Working Pressure 150 PSI
6-Year Tank and 2-Year Limited Parts Warranty
Revised April 2011
R E S I D E N T I A L
Protects the tank from corrosion.
Maximizes tank life.
-
For ease of installation
For use when
Patented design reduces NOx