PEMF Solutions Pulse Pro User Manual

PEMF Solutions Pulse Pro User Guide
***PLEASE READ THESE INSTRUCTIONS COMPLETELY BEFORE
ATTEMPTING TREATMENT USING THE PULSE PRO***
THE MAGNETIC FIELD INTESITIES GENERATED BY THE PULSE PRO ARE
CAPABLE OF DAMAGING MEMORY CARDS USED IN MANY PORTABLE
ELECTRONIC DEVICES. CARE MUST ALSO BE TAKEN WITH "SMART"
AUTOMOBILE KEYS, ELECTRONIC KEY-RING FOB'S AS WELL AS MAGNETIC
STRIPE DEBIT/CREDIT CARDS AND OTHER MAGNETIC MEDIA SUCH AS
VIDEO AND AUDIO TAPES. THESE ITEMS SHOULD BE REMOVED AT LEAST 6
FEET FROM THE TREATMENT COIL AND PULSE PRO UNIT WHEN IN USE.
METALLIC APPAREL, NECKLACES, BRACELETS, ETC. SHOULD BE REMOVED
DURING TREATMENT AS CURRENTS MAY BE INDUCED INTO THEM BY THE
MAGNETIC PULSE FROM THE TREATMENT COIL; FOR THE SAME REASON, A
BENCH, BED OR CHAIR FREE OF METALLIC OBJECTS SHOULD BE USED AS A
LOCATION FOR TREATMENT. TO AVOID UNDESIREABLE INTERACTION, CARE
MUST BE TAKEN NOT TO REST THE TREATMENT COIL ON OR WITHIN ONE
FOOT OF THE Pulse Pro CABINET WHILE IN OPERATION.
ALWAYS PLUG IN BOTH TREATMENT COIL CONNECTIONS BEFORE TURNING
MAIN POWER ON.
ALWAYS TURN MAIN POWER OFF BEFORE UNPLUGGING ANY TREAMENT COIL
CONNECTORS.

INSERT BOTH TREATMENT COILS INTO THE SOCKETS like a key into a lock
and push all the way in and then twist clockwise (to the right) until a click is heard.

POWER CORD plugs into the back of the Pulse Pro and plugs into a 117VAC wall
socket

MAIN ON/OFF POWER SWITCH turns the Pulse Pro on and off.

BLACK PULSE INTENSITY KNOB should always be turned CLOCKWISE to its
lowest level.
 GREEN BUTTON starts the treatment cycle (short press – less than 1 second), or
sets the countdown time (long press - greater than 1 second).

RED BUTTON ends the treatment cycle manually. The treatment can also be ended
manually by switching the ON/OFF power switch to OFF.

DIGITAL TIMER - begins counting down from the initial displayed time when the
green start button is pressed. The timer countdown may be reset manually by
pressing the red stop button at any time during the countdown. The default
countdown time is 3 minutes upon initial application of power using the main power
ON/OFF switch. The countdown time may be changed to either 6 minutes or 2
minutes by pressing and holding the green start button for more than one second.
To return to the default count down time of 3 minutes, either cycle the main power
on and off or press and hold the red stop button down for more than one second.