Page 1
INSTALLATION INSTRUCTIONS V-LINE BACK SUGGESTED USE V-line series is the Stand anti-theft protection dedicated to smartphones and tablets. The aesthetic product presentation is allowed by two types of sensors: angled (25°) and flat. An additional advantage is the possibility of rotation of the sensor by 90°, which allows convenient testing of the product.
Place the cable (with USB connector) in a special groove located Stick Stand to the furniture and press for approx. in the housing of Stand V-line. 10 seconds for good bonding of the sticker adhesive. Optiguard sp. z o.o. ul. Aleksandrowska 6-10, 87-100 Toruń NIP 956-213-03-91 2 / 5...
Page 3
Stick the phone to the sensor and press for approx. 10 seconds The smartphone will be simultaneously charged and protected. for good bonding of the sticker adhesive. Optiguard sp. z o.o. ul. Aleksandrowska 6-10, 87-100 Toruń NIP 956-213-03-91 3 / 5...
Page 4
USB 5V/2A charger provides adequate power for Stand Plug the cable from Stand V-line with USB connector in the V-line and allows to charge the protected product. charger with USB port. Optiguard sp. z o.o. ul. Aleksandrowska 6-10, 87-100 Toruń NIP 956-213-03-91 4 / 5...
Page 5
LEDs in the sensor confirm Plug USB charger with connected Stand V-line into a power activation of the system. Finished! outlet (AC 230V). Optiguard sp. z o.o. ul. Aleksandrowska 6-10, 87-100 Toruń NIP 956-213-03-91 5 / 5...