Charging The Battery; Turning The Camera On/Off - Adventure Kings Action Camera User Manual

Charging The Battery

Connect the supplied micro USB cable into the camera's
micro USB port into a wall adaptor, car charger or computer
USB 2.0 port.
The camera will turn on, the Charging Light will emit a
blue light while charging and will turn off when charging is
complete.
Note: the Indicator Light will remain on if the Action Camera
is on. When plugged into a power source that isn't a
computer, the camera will automatically start recording.
Installing And Removing
The Micro SD Card
1. Make sure the camera is off when inserting or removing
the micro SD card.
2. Insert the memory card in the correct direction (the gold
contacts on the SD card should face the front of the
camera) into the Micro SD card slot. Damaged or lost data
may occur if installed incorrectly.
3. To remove the micro SD card, using your fingernail, press
down on the card until it clicks. It will now pop up out of
the camera.

Turning The Camera ON/OFF

TURNING ON THE CAMERA
• Press the Power/Mode button, after 4 seconds the Screen
will display the start-up screen and a sound is heard. The
Indicator Light will show red.
TURNING OFF THE CAMERA
• Press and hold the Power/Mode button for 4 Seconds
until the Screen displays the Adventure Kings Logo and a
sound is heard. The screen will go blank and the Indicator
Light will turn off.
• After 3 minutes (default) of inactivity, the camera will shut
down automatically, conserving battery life.
Indicator Light
Micro SD
Card Slot
Power/Mode Button
Adventure Kings Action Camera 3