Advertisement
Quick Links
Lites
Lites F200 c5
Colour RGBWA
Owners 's & Service manual
Read this manual totally and carefully follow all the instructions contained. File this manual for future
use. It is essential to read all the information contained to ensure installation, service and full operation
of the LitesF200.
All operations must be accomplished, handled and carried out by qualified personnel only. Not complying
with given notice will void warranty and will free manufufacturer from any liability/responsability
www.litessrl.com
Advertisement
Summary of Contents for Lites Lites F200 c5
- Page 1 Lites Lites F200 c5 Colour RGBWA Owners ‘s & Service manual Read this manual totally and carefully follow all the instructions contained. File this manual for future use. It is essential to read all the information contained to ensure installation, service and full operation of the LitesF200.
-
Page 2: Warranty
Unpack the carton and gently remove Lites F200 from the box. Ensure Lites F200 received is integer from origin in all its components. In the event the Lites F200 shows any damage, do not use it and contact immediately your transporter as well as your seller. - Page 3 Colour frame dimensions: 195x185 mm (the use of standard 185x185mm colour frame is totally acccettable) Aluminium die-caste body to maximize heat dissipation Operating temperature range: -15°C + 35° C Maxium temperature on the Lites F200 +60°C Weight of the unit: Kg 6,9 Worm-gear beam adjustment on standard Lites200F Rear handle for good grip of unit ;...
- Page 4 Lites F200 is delivered with a robust yoke which hosts 3 x 12 mm mounting holes. The use of an adequate G-clamp to sustain at least twice the weight of the Lites F200 (Lites200F weighs 6,9 kg) and/or M10 screw is mandatory. The use of safety chain(s) to sustain twice the weight of the Lites F200 is also mandatory, the safety chain adds more protections to users and third-parties.
- Page 5 WARNING ! Installation(s) must be accomplished, handled and carried out by qualified personnel only and must comply with all norms in force in the installation's country Lites F200 is supplied with a free Blue Neutrik PowerCon plug that must be wired using a 3x1.5mm² lead , additional specifications include: Operating Voltage: 300/500V ‒...
- Page 6 Signal Control Connection Lites F200 can be operated via either DMX512A and or RDM ready . For dasy chain connection use a -2 x 0,5 mm² size lead wire plus shield. Connect Pin 1 to ground, 2= data – while Pin 3 = data +. Pins 4 & 5 are not connected.
- Page 7 SoFt Shows Software version DMX Operating Modes (Mode) Selecting 1 of the 4 available modes it enables the number of channels required, and its relevant modes, needed to operate Lites F200 C5 mode 8 ch RGBWA (default) Function dmx levels 0..255...
- Page 8 Do not touch nor clean the LEDs nor the sourranded area with solvent Device disposal information At the end of its life, Lites F200 must be disposed to an appropriate electrical and electronic equipment waste collection centre. Eco-friendly disposal, helps to avoid possible negative impact on the environment and human health and promotes the reuse and/or recycling of the materials making up the product.