mplus HERA51 Manual

Mobile pos. android 8.1, oreo

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

HERA51 Mobile POS

Android

8.1, Oreo

Version 1.00

Table of Contents

Need help?

Do you have a question about the HERA51 and is the answer not in the manual?

Questions and answers

Summary of Contents for mplus HERA51

Page 1 HERA51 Mobile POS Android 8.1, Oreo Version 1.00...
Page 2 HERA51 Mobile POS - 2 -...
Page 3: Important Notices
Important Notices IMPORTANT NOTICES FOR USA FCC ID: 2ASPU-HERA51 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 4: For Product With Laser
HERA51 Mobile POS FOR PRODUCT WITH LASER This laser component emits FDA / IEC Class 2 laser light at  the exit port. Do NOT STARE INTO BEAM DIRECTLY.  Do not aim the beam at the eyes.  Any adjustments or performance excluding those specified herein ...
Page 5: Safety Precautions
 Do not use any pointed or sharp objects against the screen surface.  Do not use the styluses which are not supplied or approved by MPLUS TECHNOLOGY  CO., LTD., to prevent possible scratches to the touch screen. Water residue on the touch screen may cause abnormal behaviors or the fall of its ...
Page 6: Battery
HERA51 Mobile POS BATTERY Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries  according to the instructions. The main battery may not be charged to full for shipment. Charge the main battery to ...
Page 7: Connection
Important Notices CONNECTION Via Bluetooth or WLAN  Connection may fail when the mobile POS is around other wireless machines or power cables as the radio frequencies of those may cause interferences.  If communication fails, move the devices much closer to each other, and try to communicate again After turning on, Bluetooth power is sustained even when the mobile POS is suspended.
Page 8: E-Label
HERA51 Mobile POS E-LABEL - 8 -...
Page 9: Release Notes
Release Notes RELEASE NOTES Version Date Notes 1.00 March 27, 2019 Initial release - 9 -...
Page 11: Table Of Contents
1.2.1. Charge Mobile POS ..............25 1.2.2. Wired Data Transmission ............28 1.2.3 Using Wireless Networks ............29 USING THE HERA51 MOBILE POS ..............30 2.1. Battery ................31 2.1.1. Battery Status Indicators ............32 2.1.2. Monitor Battery Level ............34 2.1.3.
Page 12 2.2.2. Manage Storage Space ............46 2.3. Touch Screen ..............54 2.3.1. Screen Brightness ..............54 2.3.2. Screen rotation ..............55 2.3.3. Screen Timeout Settings ............59 2.3.4. Text Size & Display Size ............60 2.4. Notifications ............... 61 2.4.1. Status LED ................61 2.4.2.
Page 13 4.2.7. Modify Wi-Fi Network ............141 4.2.8. Disconnect Wi-Fi Network............141 4.3. Use Bluetooth ..............142 4.3.1. Bluetooth Profiles ..............142 4.3.2. Turn On Bluetooth ............... 143 4.3.3. Change Bluetooth Name ............145 4.3.4. Pair Bluetooth Devices ............146 4.3.5. Unpair Bluetooth Device ............
Page 14: Introduction
HERA51 Mobile POS INTRODUCTION The HERA51 mobile POS, powered by Android 8.1 Oreo, is light-weight, easy to use, providing powerful and handy tools for the purpose of delivering flexibility in customization. Specifically designed to work as an industrial PDA, it provides rich options of data collection, voice and data communication, long-lasting working hours, and so on.
Page 15: Features
Charging cradle RELATED DOCUMENTATION Log in to GoBetween to access related documentation about the HERA51 mobile POS from the CipherLab Central Service (CCS) platform. Download the GoBetween desktop or mobile device application, or launch the GoBetween Lite web application from the following...
Page 16: Quick Start
HERA51 Mobile POS Chapter 1 QUICK START This chapter helps you get ready for starting using the mobile POS. IN THIS CHAPTER 1.1 Overview ..............17 1.2 Charging & Communication .......... 25...
Page 17: Overview
Quick Start 1.1. OVERVIEW Description Description Phone Receiver Status LEDs Light Sensor & Proximity Sensor Touch Screen Microphone Charging & Commnuication Port Loudspeaker Power Button Side Trigger Key Camera Flash Camera Battery (with Cover) Hand Strap Hole Card Reader Volume Keys Battery Latch Scan Window NFC Detection Area...
Page 18: Installing/ Removing Battery
HERA51 Mobile POS 1.1.1. INSTALLING/ REMOVING BATTERY For shipping and storage purposes, the mobile POS and the main battery are saved in separate packages. Note: Any improper handling may reduce the battery life. INSTALL MAIN BATTERY To install the main battery, please: Insert the main battery with the contact pins facing the lower end.
Page 19 Quick Start IMPORTANT CHARGING INFORMATION Input: AC 100-240V, 50-60Hz; output: 5V/2A Power Adaptor CipherLab approved 3.8V 4000mAh rechargeable Li-ion CipherLab proprietary Battery Pack Approx. 4 hours via adapter at 25°C Charging time For the first time charging the main battery, please charge it for at least 8 to 12 hours.
Page 20: Installing Sim Card, Sam Card And Memory Card
HERA51 Mobile POS 1.1.2. INSTALLING SIM CARD, SAM CARD AND MEMORY CARD The HERA51 mobile POS is equipped with one SIM card slot, two SAM card slot and one memory card slot. To insert the cards: Remove Battery Remove the battery as described in Insert your fingernail into the notch above the inner lid that protects the card sockets chamber, and lift it up.
Page 21 Quick Start After the chamber is revealed, insert SIM cards, the SAM card and the microSD card into their respective sockets. Close and push back the hinged cover till a click sounds. To Install the Cards: Swing the top to open. Insert the cards, close the it back Replace the inner lid.
Page 22: Power On/Off Mobile Pos
HERA51 Mobile POS 1.1.3. POWER ON/OFF MOBILE POS POWER ON To power on the mobile POS, press and hold the power button located on the upper right side of the device. The mobile POS will turn on and show the...
Page 23: Homescreen Selection
Quick Start 1.1.4. HOMESCREEN SELECTION Select Home app Upon the first time you launch the system, a window will pop up to request AppLock your immediate choice of home screen. By selecting “ ”, you will directly enter AppLock application (please refer to AppLock User Guide for detailed instructions on AppLock settings) to start configuring the interface provided to normal users of this device;...
Page 24: Using Hardware Buttons
HERA51 Mobile POS 1.1.5. USING HARDWARE BUTTONS On the bottom of the mobile POS are three hardware buttons that deliver the following functions: Button Function Description Back button Returns to the previous screen or closes the active window or keyboard.
Page 25: Charging & Communication
Quick Start 1.2. CHARGING & COMMUNICATION 1.2.1. CHARGE MOBILE POS The main battery may not be charged to full for shipment. When you first receive the kit package, you will need to charge the main battery to full before using the mobile POS. You may use the Snap-on Charging Cable or Charging Cradle along with a power adapter to charge the mobile POS.
Page 26 HERA51 Mobile POS USE SNAP-ON CHARGING CABLE The Snap-on Charging Cable provides a convenient way to charge your mobile POS. Fasten the Snap-on Charging Cable to the lower end of the mobile POS. Connect the other end of the cable to a USB port or the adaptor.
Page 27 2) Connect the adapter to the Cradle, and plug the other end into an electrical outlet. The status of the mobile POS charging is shown on the device itself; while the LED indicator on HERA51 Charging Cradle shows the status of battery charging as below: Cradle LED Indicator...
Page 28: Wired Data Transmission
HERA51 Mobile POS 1.2.2. WIRED DATA TRANSMISSION Use the Snap-on cable to connect the mobile POS to your PC for data transmission. Connect your device to the computer with the supplied Snap-on cable. Swipe down from the status bar to reveal Notifications Drawer.
Page 29: Using Wireless Networks
Quick Start 1.2.3 USING WIRELESS NETWORKS The mobile POS supports widely applied wireless technologies including Bluetooth v4.1 & v2.1+EDR, 802.11 a/b/g/n/ac, and is able to send/receive data in real time in an efficient way. Select GSM/GPRS/EDGE/WCDMA/HSPA/HSPA+/LTE CAT 6 modules embedded for a total wireless solution for data and voice communication.
Page 30: Using The Hera51 Mobile Pos
HERA51 Mobile POS Chapter 2 USING THE HERA51 MOBILE POS This chapter walks you through the fundamental usage and features of this device. IN THIS CHAPTER 2.1 Battery ..............31 2.2 Memory ..............43 2.3 Touch Screen ............. 54 2.4 Notifications ............... 61 2.5 Date and Time ............
Page 31: Battery
Using the HERA51 Mobile POS 2.1. BATTERY Main Battery  The mobile POS is powered by a rechargeable 3.8V / 4000 mAh Li-ion battery pack. It takes approximately 4 hours to charge it to full from the power adaptor (for the first time charging the main battery, please charge it for at least 8 to 12 hours).
Page 32: Battery Status Indicators
HERA51 Mobile POS 2.1.1. BATTERY STATUS INDICATORS The main battery pack is the only power source for the mobile POS to work. Therefore, when the main battery level goes low, you need to replace the battery pack with a charged one or charge it as soon as possible.
Page 33 Using the HERA51 Mobile POS Note: When the mobile POS is fully charged and battery level reaches 100%, the battery icon will change from to indicate charging is completed. Warning: (1) Once the battery level drops below 15%, the low battery notification will be displayed on the screen.
Page 34: Monitor Battery Level
HERA51 Mobile POS 2.1.2. MONITOR BATTERY LEVEL MAIN BATTERY LEVEL The main battery is the only source that feeds the mobile POS to work. It also supplies the backup battery on the main board in order to retain the data stored in DRAM. When main battery level gets low, recharge it or replace it as soon as possible.
Page 35 Using the HERA51 Mobile POS BATTERY SAVER MODE Battery saver You can have the mode automatically turned on when the main battery gets low. This mode will limit the use of location services, vibration and most background Battery saver processing data. Once is enabled, the title bar of your screen will turn red.
Page 36 HERA51 Mobile POS BATTERY OPTIMIZATION Battery optimization With enabled for the applications, you can make sure they stay inactive when your device is idle or when they have not been used for days. Battery More Battery optimization screen, tap and then select “...
Page 37 Using the HERA51 Mobile POS LOW BATTERY ALERT The mobile POS prompts a warning notification reminding you to charge the main battery when the main battery level drops to 15% and 5%. In the meantime, the device’s status LED indicator will blink red.
Page 38: Replace Main Battery
HERA51 Mobile POS 2.1.3. REPLACE MAIN BATTERY When main battery level is low, follow the steps below to replace the main battery. SHUT DOWN TO REPLACE THE MAIN BATTERY Shut the device down to replace the main battery, please: 1) Make sure the sub battery (backup battery) and the new main battery are fully-charged.
Page 39 DO NOT replace the main battery when backup battery’s power is low. Please connect HERA51 mobile POS with the external power source to charge it till the “Low Sub Battery” notification icon disappears from the status bar. Once the “Low Sub Battery”...
Page 40: Power Management
HERA51 Mobile POS 2.1.4. POWER MANAGEMENT For any portable device, power management is a critical issue especially when you are on the road. Below are some tips to help you save battery power. Warning: Using backlight, wireless connectivity, and peripheral devices on battery power will substantially reduce battery power.
Page 41 Using the HERA51 Mobile POS ENTER AIRPLANE MODE Airplane You can enable mode to have all the wireless radios (including call functions, data connections such as Bluetooth, Wi-Fi and 3G/4G) on your mobile POS turned off, which will considerably reduce the power consumption of your battery.
Page 42: Battery Temperature Anomaly
Status LED in the front panel blinks with a warning window popup to remind the user to disconnect the charger, and HERA51 mobile POS will automatically suspend charging the battery. For battery life, please unplug the charger immediately and charge your HERA51 mobile...
Page 43: Memory
When choosing an SD card for best compatibility and performance with HERA51, please make sure of the capacity you need. For the use of SDXC card, please use a new card and make sure it has not been used in other host devices (computers, cameras, or readers).
Page 44: Check Memory Usage
HERA51 Mobile POS 2.2.1. CHECK MEMORY USAGE The memory manager can offer a glance of how the device is using its RAM. ENABLE DEVELOPER OPTION Developer Option To check the memory usage, you have to enable “ ” : App Drawer (All Apps)
Page 45 Using the HERA51 Mobile POS CHECK MEMORY USAGE to enter memory manager screen. On the main screen, it tells you not only the used and free memory space of the RAM, but how your pattern of usage has impacted the device’s overall performance. To figure...
Page 46 HERA51 Mobile POS 2.2.2. MANAGE STORAGE SPACE To your Android device, the SD card can serve as an extension of your device’s internal storage (which comes as 16 GB of flash memory to store the OS, applications and files) other than a portable storage place.
Page 47 Using the HERA51 Mobile POS SET UP SD CARD AS PORTABLE STORAGE Using SD card as a portable device allows you to treat it as a USB disk, by swapping it between your Android device and the computer to easily transfer files. This is quite handy when there is a need to offload files that are taking up too much storage space.
Page 48: Notifications
HERA51 Mobile POS To start: 1) Insert the SD card. A notification icon indicating that an SD card is detected will be SET UP shown in the status bar; swipe down from the status bar and tap on “ ”.
Page 49 Using the HERA51 Mobile POS TRANSFER PHOTOS & MEDIA BETWEEN THE DEVICE & PC To transfer photos and media between this device and PC when the mounted SD card is set as portable storage, please: 1) Connect your mobile POS with PC with supplied USB cable.
Page 50 HERA51 Mobile POS CONVERT THE SD CARD TO INTERNAL STORAGE 1) You can always convert the SD Card from portable storage to internal storage. On Storage screen, tap the SD card. Before you start, make a backup of the files on this disk if you would like to keep them.
Page 51 Using the HERA51 Mobile POS SET UP SD CARD AS INTERNAL STORAGE Using SD card as internal storage allows you to extend your existing device storage and to store huge applications. This SD card will be reformatted and encrypted with a file format that is not readable by another device.
Page 52 HERA51 Mobile POS To start: Insert the SD card. A notification will pop up indicating that an SD card is detected tap SET UP “ ”. Use as internal storage NEXT Tap “ ” and then “ ”. ERASE & FORMAT Tap “...
Page 53 Using the HERA51 Mobile POS CONVERT THE SD CARD TO PORTABLE STORAGE You can always convert the SD Card from internal storage to portable storage. On Storage & USB , tap the SD card. Before you start, make a backup of the files on this disk if you would like to keep them.
Page 54 HERA51 Mobile POS 2.3. TOUCH SCREEN The mobile POS comes with a 4.7” transmissive LCD with 1280 by 720 pixels resolution (HD). The LED backlight of the screen, which helps ease reading under dim environments, can be controlled manually and automatically.
Page 55 Using the HERA51 Mobile POS 2.3.2. SCREEN ROTATION By default, the device automatically rotates the screen to when you turn the device sideways. To switch this function on or off: App Drawer (All Apps) Settings Display 1) Go to Advanced...
Page 56: Home Screen
HERA51 Mobile POS Quick Settings menu Use two fingers to swipe down from the top of the screen to open Auto rotate tap the icon to enable screen rotation. This quick setting method allows you to temporarily enter landscape mode to enhance your typing experience by using a wide keyboard.
Page 57 Using the HERA51 Mobile POS REMOVE AUTO-RITATE FROM QUICK SETTINGS MENU & DISPLAY SETTINGS Auto-rotate Settings menu You can remove the switch icon on Quick to minimize the possibility of accidentally turning on the auto-rotation function: Quick Settings menu 1) Use two fingers to swipe down from the top of the screen to open...
Page 58 HERA51 Mobile POS App Drawer (All Apps) Settings Accessibility Go to and switch off Auto-rotate Settings Display screen. By doing so, the auto-rotation option will be hidden in Note: Auto-rotation is not supported for certain applications. Without enabling “Allow Home Screen...
Page 59 Using the HERA51 Mobile POS 2.3.3. SCREEN TIMEOUT SETTINGS App Drawer (All Apps) Settings Display Advanced Sleep. Go to Select the time lapse for screen timeout.
Page 60 HERA51 Mobile POS 2.3.4. TEXT SIZE & DISPLAY SIZE App Drawer (All Apps) Settings Display To change text size, please go to Advanced Font size. Tap the small A icon or the large A icon to select the font size between Small, Default, Large and Largest.