croydon CTR4 Series Instruction Manual

Cutter

Advertisement

Quick Links

INSTRUCTION MANUAL

CUTTER – MODEL: CTR4-16416-700

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be
-
observed including the following:
-Before connecting your blender check if voltage of your power system
corresponds to the same specified on the appliance.
- To protect against risk of electrical shock, do not put cord, plug, base or motor in
water or other liquids.
- Never connect two or more appliances in the same power outlet.
-When not in use, unplug the equipment.
-Avoid contact with moving parts because blades are sharp. "Handle carefully".
-Keep hands and utensils out of container while equipment is working to prevent
the possibility of severe personal injury and or damage to blender. A plastic
spatula may be used but only when Cutter is "NOT RUNNING".
-Only remove the container when motor has "COMPLETELY STOPPED".
- Never operate a switch with wet hands, boots or clothes.
- Unplug appliance before any maintenance or cleaning.

PRE-OPERATION

Place the container on the top of the base observing the matching groove.
-
- Fix the blade on the central axle.

OPERATION

- Introduce all ingredients in pieces simultaneously.
- Put cover in position (observing to match the fasteners to its holder) and lock
the fasteners.
- At the end, remove the container with the blade to remove the food.

CLEANING

- For your safety unplug appliance before cleaning operation.
- Wash up all removable parts using water and detergent.
- Clean the base with only a wet cloth.
- Do not use water jet or immerse appliance in water.
M
AINTENANCE
- Always maintain your equipment clean and in perfect operation conditions,
those providences, will help your equipment to last longer.
- To guarantee a good performance, we recommended an annual revision of
the equipment.
CROYDONMAQ INDUSTRIAL LTDA.
CROYDON
Estrada São Lourenço, 891 - Capivari
Duque de Caxias- RJ / Brasil - CEP 25243-150
Phone: 55 21 2777- 8100 / Fax: 55 21 2777- 8106
e-mail: croydon@croydon.com.br - www.croydon.com.br
CROYDON
CTR4
CTR4
CTR4-16416-700

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CTR4 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for croydon CTR4 Series

  • Page 1: Instruction Manual

    - To guarantee a good performance, we recommended an annual revision of the equipment. CROYDONMAQ INDUSTRIAL LTDA. CROYDON CTR4-16416-700 Estrada São Lourenço, 891 - Capivari Duque de Caxias- RJ / Brasil - CEP 25243-150 Phone: 55 21 2777- 8100 / Fax: 55 21 2777- 8106 e-mail: croydon@croydon.com.br - www.croydon.com.br...
  • Page 2 CROYDON CROYDON CUTTER (CTR4) CUTTER (CTR4) Item Code Description 40.078-3 Base Cover 40.077-3 Aluminum Base 3.000-3 Foot 16.060-3 Container 16.059-3 Axle 3.002-3 Motor Screw 1/4” Fixer 3/16” 16.058-3 Handle 16.055-3 15.027-3 Matching Pin 37.366-3 On / Off Switch 37.025-3 Switch Plate 37.072-3...

This manual is also suitable for:

Ctr4-16416-700

Table of Contents