Page 4
Roughing-In Minimum Standard cabinet Size required Sink Size Minimum Cabinet Size 36” 36” 33” 33” 30” 30” 24” 24” Ensure clearance for faucet installation Apron 9” 1” Front of cabinet Note: Please consider this details before you choose your cabinet, for standard size cabinet modifications may be required.
Page 5
Please Note: The step-by-step guideline below is a general reference for installing the Zuhnë Farmhouse Sink. Please keep in mind that this is a custom installation. Zuhnë cannot be liable should there be any discrepancies with your installation. Zuhnë recommends installing all Zuhnë products by hiring a licensed, professional plumber.
Page 6
Apron Reveal Options 4” to 5½” 26 7/8” 26 7/8” 29 3/4” 29 3/4” Flush with Cabinet Extended Front Range STEP 2: Measures for Supports Measure the "true" height of the sink, from where the top aligns with the countertop surface to the bottom of the sink’s sides, which will rest on the supports.
Page 7
Suggested support STEP 4: Cut the Cabinet Front Measure the height of the sink front, and add 1/8” to this dimension when you mark the base cabinet front cutout. This allows the sink to rest just above the cut edge, without being supported by it.
Page 8
STEP 5: Install the Sink Test-fit the sink in the opening. The entire weight of the sink should be carried by the side supports. Check that the sink is level from side to side and front to back. If necessary, add tapered wood shims to adjust.
Page 9
Recommendations: -Always use the Grill provided to avoid scratches. -When it comes to maintenance, the best thing you can do is be consistent in your cleaning. It is prefer- able to clean a little on a frequent basis than a heavy duty cleaning once is a while. -You should make sure that the sink is always clean and dry when not in use.
Need help?
Do you have a question about the PRATO 30 and is the answer not in the manual?
Questions and answers