Table of Contents
Advertisement
Printing method
Number of print columns 29 columns (10CPI), 44 columns (15CPI)
Print speed
Print direction
Line spacing
Paper feed method
Paper feed speed
Character set
Font configuration
* Graphic Feed Not Available
Character size
Character spacing
Dot spacing
Gross dot
Print area
Print Buffer
Interface
Peripheral drive
External dimensions
(Printer)
(Power supply unit)
Weight
(Printer)
(Power supply unit)
6. GENERAL SPECIFICATIONS
Serial impact dot matrix printing,
9 wires
Approx. 2 lines/sec
Bi-directional
1/6 inch
Friction Feed
Approx. 12 lines/sec
ASCII
Special
Block graphics*
Katakana (Japanese)
10CPI Ordinary characters 5 9 dots
15CPI Ordinary characters 7 9 half dots
10CPI
15CPI
10CPI
15CPI
10CPI
15CPI
10CPI
15CPI
10CPI
15CPI
Approx. 1.5 KB
Parallel Interface (Centronics compatible)
2 outputs (each 1A max. at 12V. Both cannot
operate at the same time.)
202(W) 200(D) 98(H) mm
(without paper holder, DC Power Connector)
60(W) 120(D) 36(H) mm (without AC cable)
Approx. 1.9 kg
Approx. 0.4 kg (without AC cable)
Block graphics*
Block graphics*
2.00 (H) 2.42 (V) mm
1.32 (H) 2.42 (V) mm
2.55 mm (1/10 inch)
1.70 mm (1/15 inch)
H=0.425 mm V=0.353 mm
H=0.340 mm V=0.353 mm
174 dots/wire/line
220 dots/wire/line
73.53 mm
74.46 mm
– 20 –
96 characters
64 characters
64 characters
64 characters
6
6 dots
5
6 dots
Advertisement
Table of Contents
