Main Unit Structure - LAUNCH TECH OBD BOOK 6830 Manual

LAUNCH
1 USB Port
2 Diagnostic Cable
3 Power Key
4 Key
[ ]
5 Key
[↑]
6 Key
[↓]
7
[ ] Key

Main Unit Structure

Testing interface:
It is a 16PIN built-in male connector to connect with the diagnostic connector.
Screen:
Two 160×160 array high definition screens with back light for displaying all the
information during testing.
Indicators:
The yellow, green, red indicators are used as visual aids to make it easier for the user
to determine test condition.
Yellow indicator: it says that the communication is "OK" and the test is normal.
Green indicator: it says that it's not sure if DTCs occur.
Red indicator: it says that DTCs occur.
OBD BOOK OBDII Auto Scanner
To connect the unit and computer for updating.
To connect the unit and vehicle socket for
diagnosis.
Press it to turn the unit on when there is no
socket for power (when using battery for power).
To return to the previous interface.
To move the cursor to upper item in the menu.
To move the cursor down in the menu.
To confirm and execute this operation.
11