Page 1
Model 682A09 IN-LINE ICP TO 4-20 MA OUTPUT VELOCITY CONVERTER Installation and Operating Manual For assistance with the operation of this product, contact PCB Piezotronics, Inc. Toll-free: 800-959-4464 24-hour SensorLine: 716-684-0001 Fax: 716-684-3823 E-mail: imi@pcb.com Web: www.imi-sensors.com...
Page 2
Service, Repair, and Return Policies and Instructions The information contained in this document supersedes all similar information that may be found elsewhere in this manual. also good practice to recalibrate after Service – Due to the sophisticated exposure to any severe temperature nature of the sensors and associated extreme, shock,...
Page 3
list(s) accompanying the shipment. A complete list of distributors and offices detailed account of the nature of the found www.pcb.com. problem(s) being experienced with the Customers within the United States may equipment should also be included contact their local sales representative inside the package(s) containing any factory customer...
Page 5
Component Name Hazardous Substances Lead Mercury Cadmium Chromium VI Polybrominated Polybrominated (Pb) (Hg) (Cd) Compounds Biphenyls Diphenyl (Cr(VI)) (PBB) Ethers (PBDE) Housing PCB Board Electrical Connectors Piezoelectric Crystals Epoxy Teflon Electronics Thick Film Substrate Wires Cables Plastic Solder Copper Alloy/Brass This table is prepared in accordance with the provisions of SJ/T 11364.
Page 6
Model 682A09 Industrial in line ICP to 4 to 20 mA converter Installation and Operating Manual For assistance with the operation of this product, contact the IMI-Sensors Division of PCB Piezotronics, Inc. Division toll-free: 24-hour SensorLine: Fax: 716-684-3823 E-mail: imi@pcb.com...
Page 7
Warranty, Service, Repair, and Return Policies and Instructions The information contained in this document supersedes all similar information that may be found elsewhere in this manual. Total Customer Satisfaction - PCB recommended as this helps build Piezotronics guarantees Total Customer confidence in measurement accuracy and Satisfaction.
Page 8
Materials Authorization (RMA) PCB for a complete statement of our Number. This RMA number should be warranty. Expendable items, such as clearly marked on the outside of all batteries and mounting hardware, are not package(s) and on the packing list(s) covered by warranty.
Page 9
Operating Guide with Enclosed Warranty Information 3425 Walden Avenue, Depew, New York 14043-2495 Phone (716) 684-0003 Fax (716) 684-3823 Toll Free Line 1-800-959-41 Ml...
Page 10
A PCB PIEZOTRONICS DIV. Table of Contents Introduction General Features Page 3 Operation and Wiring Standard Wiring Page 3 Suggested Cabling Page 4 RV (Raw Vibration) Output Page 4...
Page 11
A PCB PIEZOTRONICS DIV. Introduction The Model 682A09 Series Industrial in line ICP to 4-20mA converter transfers the signal from any 100 mV/g ICP industrial accelerometer to 4-20mA overall vibration velocity. The converter outputs a 4-20mA signal that is proportional to the overall velocity and raw acceleration of the machinery. Ideal for monitoring the vibration of process equipment such as fans, motors and pumps, the output of the converter is routed to a PLC, DCS or SCADA system and used for process control or predictive maintenance.
Page 12
052AP010AP is a 10 ft. polyurethane cable, 2-socket MIL (AP) on each end. The 2-socket MIL connector (AP) mates to most any 2-pin MIL industrial accelerometer and also the model 682A09. Pictures of this cable and connector can be found at IMI’s website www.imisensors.com.
Page 13
Model Number Revision: A IN-LINE ICP TO 4-20 MA OUTPUT VELOCITY CONVERTER 682A09 ECN #: 35125 Performance ENGLISH OPTIONAL VERSIONS Input Signal(ICP Accelerometer) 100 mV/g 10.2 mV/(m/s²) Optional versions have identical specifications and accessories as listed for the standard model except where noted below.