Asus STRIX Z270F GAMING Bios Manual page 56

Ext. Fan(s) Configuration
ASUS FAN EXTENSION CARD is required to configure these items
Extension Fan 1-3 Q-Fan Control
[Disabled]
[DC mode]
[PWM mode]
Extension Fan 1-3 Q-Fan Source
The assignment fan will be controlled according to the selected temperature source.
[EXT_Sensor2] [EXT_Sensor3] [Multiple Sources]
56
HAMP Fan Upper Temperature
temperature. The HAMP Fan will operate at the maximum duty cycle when
the temperature source is higher than the limit.
HAMP Fan Max. Duty Cycle (%)
When the temperature source reaches the upper limit, the HAMP Fan will
operate at the maximum duty cycle.
HAMP Fan Middle Temperature
temperature.
HAMP Fan Middle. Duty Cycle (%)
HAMP Fan Lower Temperature
temperature. The HAMP Fan will operate at the minimum duty cycle when
the temperature source is lower than the limit.
HAMP Fan Min. Duty Cycle(%)
When the temperature source is under the limit, the HAMP Fan will operate
at the minimum duty cycle.
Disable the Extension Fan Q-Fan control feature.
Enable the Extension Fan Q-Fan control in DC mode for 3-pin extension
fan.
Enable the Extension Fan Q-Fan control in PWM mode for 4-pin extension
fan.
the other end to the component to get the temperature.
the other end to the component to get the temperature.
automatically change based on the highest temperature.
ASUS STRIX Z270F GAMING BIOS Manual
[Manual].