Depending on the optional controllers and air curtain model selected one of the following controllers is supplied. NOTE: If any parts are missing or damaged contact your place of purchase. Ecopower Plus Remote Control Ecopower Remote Control (for Electric and Water Heated units)
REMOTE CONTROL INSTALLATION Mount the Ecopower or Ecopower Plus Remote Control in a convenient position directly to the wall or onto a switch box. As the Remote Control has a room air temperature sensor in it, which may be selected, avoid a location where the Remote Control would see false room temperatures such as in direct sunlight or on a very cold wall.
Remote Control Settings On the back of the PCB inside the Ecopower/Ecopower Plus Remote Control you will find four DIP switches (see Fig 6) that provide optional features detailed in Table 1 below. Fig 6 Table 1 Feature Explanation Default...
Page 6
Ecopower/Ecopower Plus Remote Control (for Electric and Water Heated units) Heating level scale Use the Remote Control to operate the air curtain as follows: 1 On/Off Turns the air curtain On or Off. NOTE: If an electric heated air curtain is heating when switched off the fan will run-on for approximately 2 minutes to dissipate excess heat.
Need help?
Do you have a question about the Ecopower and is the answer not in the manual?
Questions and answers