Summary of Contents for Central Pneumatic Professional 91365
Page 1
ACT WRENCH - I/2 INCH IMP ACT WRENCH - I/2 INCH ACT WRENCH - I/2 INCH ACT WRENCH - I/2 INCH 91365 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE.
Use care when transporting tool. Disconnect tool from air supply when moving tool in the workplace. Carry tool only by the handle without drawing the trigger. SKU 91365 Page 2...
Page 3
16. Remove adjusting keys and wrenches. Check that keys and adjusting wrenches are removed from the tool or machine work surface before plugging it in. 17. Stay alert. Watch what you are doing, use common sense. Do not operate any tool when you are tired. SKU 91365 Page 3...
Page 4
When unpacking, check to make sure the following parts are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible. SKU 91365 Page 4...
Connect the compressor air hose (minimum 3/8” I.D.) to the Air Inlet (1) on the handle of the Impact Wrench Motor Housing Assy. (12). If any air leaks are detected, disconnect the air hose and repair the leak. SKU 91365 Page 5...
Or, install the automatic oiler-filter system as illustrated on page 5. Before each use, drain water out of the air compressor tank and condensation from the air lines. Refer to the Air Compressor Operator’s Manual. SKU 91365 Page 6...
BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 91365 Page 7...