Page 1
U S E R G U I D E fall detection. gps. go with confidence!
Page 2
IMPORTANT: charge belle+ ™ cradle before first use Charging Procedures: Plug in the charging cradle and place belle+ into the cradle. belle+ is in the process of charging when the small, • red battery light on the device is flashing. belle+ is fully charged when the small, red battery •...
Page 3
speaker call button microphone blue blue blue battery call WiFi light light light light...
Page 4
H O W T O C A L L F O R H E L P how to call for help 1. Press and hold the call button until the call light on belle+ ™ turns blue. 2. After a short delay, you will hear tones and a voice saying that you are being connected to the support center.
Page 5
press and hold call button call light will turn blue...
Page 6
how to call for help BY USING THIS DEVICE, YOU ACKNOWLEDGE Coverage: This 3G product requires adequate AT&T cellular coverage to work properly. It can be located using GPS and WiFi location technologies. It is important to test the device to know if it works in your area.
Page 7
AND ACCEPT THE FOLLOWING INFORMATION. Pacemakers: Individuals with pacemakers should review their pacemaker materials regarding interaction with cell phones, and take the same precautions the materials recommend for this device. Fall Detection: Fall detection is an optional service for belle+™ and uses patented algorithms to detect falls.
Need help?
Do you have a question about the belle+ and is the answer not in the manual?
Questions and answers