Advertisement
Configuration
Broadcom BCM4709S, 2 core,
clocked at 1.4GHz
Dual Channel PCB antenna,
2.4G, the maximum gain to 4dBi,
5G, the maximum gain to 6dBi
Large memory,
512MB extensive memory,
Hosting OS Mi Wifi Smart Router
HDD,
Monitoring of the internal hard disk
7 days a week / 24 hours a day,
Powerful home center storage and
data processing
Frequently Asked Questions
Why, after a successful connection of cable for
outside network and completion of all settings, an
error occurs accessing the network?
First, check whether you have connected the network
cable, and make sure your username and password is
correct; Visit any web page, via mobile app or a Web
browser, and using the smart error detection to find
and resolve the problem. It may take a few minutes.
Error 678: The server operator does not take the
same login.
Remedy: once again pull out and reinsert the cable for
outer network, reboot the optical fiber / home gateway /
ADSL modem, after 10 minutes, try to connect again.
Error 691: The server operator shows an error in
login password or expiration of your account.
Remedy: Check whether the user name and password
are correct or enter a login and password on the
operator's website to check the details of payment
services.
If your operator does not specify an error number, we
recommend that you restart the device (optical fiber /
home gateway / ADSL modem).
Is it possible to install the name of Wifi network
(SSID) in Chinese? Why sometimes name of Wifi
network is distorted?
Mi router supports Chinese names for WiFi network,
but for the normal image network name, you must be
connected to the router device (smart phone / pad /
computer) that also supports Chinese SSID.
Why I can not find a 5G signal of Mi router?
To connect to the frequency of 5G, it is necessary that
the network card device also supports 5G. If you find
that the device supports the signal 5G, but still can not
connect to it, in that case, the device does not support
the domestic channel signal 5G.
Recommended check which signals are supported
by the device, and then configure the operation of the
signal Mi router.
What is the IP address and password of web-tools?
IP address of the site Mi router miwifi.com or
192.168.31.1. Password for utilities same as WiFi
password set during device initialization.
If you have forgotten your password, go to the mobile
app to see the password, or click router reset.
Why after switching on router, red light indicates?
Red light on indicator shows the occurrence of system
errors or problems with operation of the device,
and indicates that you are in safe mode. During
safe mode, all the data stored on the router, will be
protected. You can restore the normal operation of
the device firmware via USB or call maintenance to
address this issue.
If red light is constantly showing up, the data stored
on the router, not lost, however, problems are arising
when switching on and during work of memory / card.
To resolve this issue, you can send the router for
repair or upgrade it, or be contacted by phone service
to address this issue.
Guarantee
In case of problems with the operation of the device
that is not related with the human factor, you can
obtain warranty service:
For 7 days from the date of purchase, in case of
problems with the operation of the device, service
center Xiaomi determines the cause of the problem,
after the presentation of the receipt, you can choose
a free replacement product, return or repair.
Within 15 days from the date of purchase, in case of
problems with the operation of the device, service
center Xiaomi determines the cause of the problem,
after the presentation of the receipt, you are entitled
to a free replacement item of the same model.
Warranty - 1 year
Advertisement
