T&M Wellness International Zero-Gravity Instruction Manual page 10

IMPORTANT: Match
the connectors with
the correct colours.
To install the Back cushion and Pillow Cushion, insert the zipper head on the back
cushion into the zipper's insert block of the envelope and zip it. Connect the plug and the
socket of the heating piece of the back rest. Connect the pillow cushion to the back rest
with the hard-adhesive tape on the pillow and the soft adhesive tape on the back (See
FIG. C).
Remove the massage chair from the package. Raise the
back rest until you hear a click, which means the back
rest is locked. Install the seat cushion, connect the seat
cushion air pipe and air pipe from the base by connector.
Connect the vibration motor plug and socket, (Fig. A) then
connect the back heater plug and socket (Fig. B).
Figure C
Page 10 of 17
Manufacturer's User Instruction Manual