coov Winbox P1 Pro Instruction Manual page 9

(you could press H2 to quit from the setting model after setting all)
4. Clear All: pressing H2 key (H2 yellow LED lamp is lighting constantly), and then
holding(3 seconds)H2 key could clear all and then quit from the setting model (H2
yellow lamp is extinguished)
H3: Combo Setting Key / Combination Setting Key
The Combo Setting Key could record a series of actions so as to realize the combo
attack and combination function as well as to carry out the combo attack by
designed key.
1.Pressing H3 key and loosing to enter into the Combo Setting Key setting model
(H2 green LED lamp is lighting constantly)
2.Implementing the combo attack operation, and the equipment would record the
operation automatically.
3.After finishing recording, re-pressing H3 key (H3 green LED lamp would light
constantly) and then setting the key for this combo attack / combination. After
setting successfully, it will carry forward the combo attack and the quit from the
setting model(H3 green LED lamp extinguishes)
4.Clear All: pressing H3 key (H3 green LED lamp is lighting constantly), and the
pressing (3 seconds) H3 key to clear all and quit from the setting model (H3 green
LED lamp extinguishes)
For example: after pressing H3 key, then pressing A, B, C, D four keys , H3 key in
succession and finally pressing E key to end the recording. E key is the execute key