Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for FERRIOL MATRAT E-Joelette
- Page 1 INSTALLATION OF THE KIT E-JOELETTE NEW GENERATION CONTENTSU OF THE KIT [Texte]...
- Page 2 ASSEMBLY STEPS PUT THE JOELETTE IN « TRANSFER MODE» REMOVE ALL OF THE CLIPS THAT IMMOBILIZE THE BREAK HOSE (EXCEPT ON THE SWINGARM) DISCONNECT REMOVE THE SHOCK ABSORBER IN BREAK LEVER LOWER PART THE JOELETTE IS READY TO RECEIVE THE KIT REMOVE THE SPINDLE AND THE SWINGARM [Texte]...
- Page 3 CONNECT THE SHOCK ABSORBER TO KIT BY USING THE SCREW AND THE NUT PROVIDED CONNECT THE KIT TO THE TRANSFER FRAME WITH THE SPINDLE MOUNT ACCELERATOR AND THE BRAKE LEVER PROVIDED AND REPLACE THE CLIPS IN ORDER TO IMMOBILIZE THE HOSE AND ELECTRIC CABLE TAKE THE BATTERY OFF ITS SUPPORT...
- Page 4 REPLACE THE BATTERY ON ITS SUPPORT IMMOBILIZE THE DIFFERENT CABLES WITH THE PLASTIC HOSE CLAMPS PROVIDED Specific information - For the maintenance and precautions for use, read the general manual attached to the package of the one-wheel Joëlette. - To make the transfer of disabled persons from their wheelchair to the Joëlette TWIN, apply the same procedure as for the classic one-wheel model.
Need help?
Do you have a question about the E-Joelette and is the answer not in the manual?
Questions and answers