Entering Characters Using T9 Text Input - Sanyo SPRINT PCS VISION SCP-2400 User Manual

Tip:
When entering text, press
( Abc > ABC > abc ).
Note:
Up to three of the most recently used input modes are displayed from
the top of the input mode list when Mode (right softkey) is pressed during
text entry. To turn off this feature, select
Text Entry > Recent Access > Off .

Entering Characters Using T9 Text Input

T9 Text Input lets you enter text in your phone by pressing keys
just once per letter. (To select the T9 Word mode when entering
text, see "Selecting a Character Input Mode"on page 43.)
T9 Text Input analyzes the letters you enter using an intuitive
word database and creates a suitable word. (The word may
change as you type.)
To enter a word using T9 Text Input:
1.
Select the T9 Word character input mode.
(See "Selecting a Character Input Mode"on page 43.)
2.
Press the corresponding keys once per letter to enter
a word. (For example, to enter the word "Bill,"press
ABC
to delete an entire entry.)
To accept a word and insert a space, press
Tip:
In order to insert a space by pressing
Auto-Space setting must be on. (See "Setting Text Entry Options"on page 74.)
44 Section 2A: Your Phone – The Basics
Paste to paste copied or cut text (if applicable).
SelectText to select stored text for copying or
cutting.
Add Word to store words that you use frequently.
(See page 45.)
GHI JKL
to erase a single character. Press and hold
to change letter capitalization
Shift
> Settings > Others >
.) (If you make a mistake, press
JKL
during the step above, the
or .
Space