Amcrest OB1-M User Manual

Amcrest Force Hand Drone OB1-M User Manual

1. Start Up

Press and hold the power button for 1
to 2 seconds to turn on the drone. A
green LED will appear indicating the
drone is on.

2. Shut Down

Press and hold the power button for
1 to 2 seconds to power off the
drone. The green LED will turn off.

3. Flight

Turn on the drone and hold it in your hand, extend your hand
forward, and then release the drone to start flying.
The drone will fly upward and begin to hover. If there is no interaction
with the drone for 1 to 2 seconds, the drone will begin to descend and
continue to hover.

4. Flight Interaction

Approach the bottom of the drone to allow the drone to ascend upward.
The drone will hover and begin to descend if no interaction is detected.
When a hand or other object approaches the drone, it will move in the
opposite direction of the object once it is detected.
The drone can be affected during flight if it encounters strong light, wind,
obstructions, or glass.
5. Flying Speed - Medium & High Speed Modes
Flying speeds of the drone are indicated by the color LED that is illuminated.
A green LED light indicates the drone is flying in medium speed. The drone
will be set to medium speed by default.
To increase the speed of the drone to high speed mode, click the power
button. A blue LED light will appear indicating the drone is flying in high speed.
To revert back to medium speed mode, press the power button again.
Power Button