Changhong Electric LED32E2200ST2 Operation Manual page 15

Basic Operation
Signal Type is DVB-C:
Tune Type: Press the ◄/► buttons to select: DTV+ATV,DTV,ATV.
Scan Type: Press the◄/►button to select scan type: Full, Network Scan.
Network ID: Press the◄/►button to select Network ID: Auto or enter digital numbers.
Frequency: Press the◄/►button to select Frequency: Auto or enter digital numbers.
Symbol Rate: Press the◄/►button to select Symbol Rate: Auto or enter digital
numbers.
Operador: Press the OK/◄/►button to select the operator .
Start: Press the ENTER button to start the auto searching.
Signal Type is Satellite:
Satellite: Press the ◄/► buttons to select current satellite .
Scan Mode: Press the ◄/► buttons to select Scan Mode: Default, Blind Scan,
Network.
Channel Type: Press the◄/►button to select channel type: Scramble,
Free+Scramble, Free.
Service Type: Press the◄/►button to select Service Type: All, DTV, Radio.
Start: Press the ENTER button to start the auto searching.
■
Channel Tuning
Press the ENTER button to start the auto searching.
First tuning ATV, press Menu and left arrow button to skip ATV tuning,
Second tuning DTV, press Menu and left arrow button to skip DTV tuning.
13