OPERATING INSTRUCTIONS Batteries installation For CR2032 Model: For AAA Model: Make sure to remove the Insert the new batteries, making battery pull-tab from the sure the plus and minus(+/-) back of your scales battery poles are aligned properly hatch before using the according to the diagram inside scale for the first time.
AUTO OFF When you step off the scale, it will automatically switch off. CALIBRATION Simply place it on a hard, flat surface, then press it awake and let it zero out. The scale will be calibrated once it goes to zero, and then you can step on and reweigh yourself.
OVERLOAD INDICATOR When the scale is overloaded (over 397lb/180kg), the screen will show “ Err ”. Please remove the weight immediately to protect the scale. MEASURING UNITS pound kilogram stone Change the unit You can change the unit to lb, kg or st by pushing the button on the back of the scale.
CLEANING,MAINTENANCE,AND DISPOSAL Cleaning You can clean your scale using a lint-free cloth dampened with water. If water is not enough to clean it, you can also use a mild dish washing soap. Changing the batteries Open the battery cover, remove the old batteries and replace it with new batteries.
GENERAL ADVICE • Do not step on the scale when the surface or your feet are wet to avoid slipping. • Protect the scale from hard knocks, moisture, dust, chemicals, drastic changes in temperature, electromag- netic fields and sources of heat that are too close. •...
Need help?
Do you have a question about the ID-767 and is the answer not in the manual?
Questions and answers