Dear Customer, Congratulations for choosing a SportPlus product. We have every expectation that you will be fully satisfied with your new purchase. To guarantee optimal function of this product, please adhere to the following instructions: • Before using this product for the first time, please read the manual carefully! •...
SAFETY INSTRUCTIONS INTENDED USE • This product is intended for private use and is not suitable for medicinal, therapeutic or commercial purposes. • The maximum permissible weight of a person using this product is • Before connecting the device to the mains, make sure the current and mains voltage match the specifications on the rating label.
Page 4
DANGER FOR CHILDREN • Batteries could be fatal if swallowed. For this reason, store batteries out of the reach of children. If a battery has been swallowed, seek medical attention immediately. • Children cannot recognize the hazards that this product may pose. For this reason, keep this product out of the reach of children.
Page 5
INFORMATION ON ASSEMBLY • The product should be carefully assembled by a responsible adult. Ask for the assistance of another, technically-skilled person in case of doubt. • Before beginning assembly of the product, read all assembly steps carefully and review the diagram.
Page 8
3. PART LIST FIXTURES The following parts are required for assembling the device. Check the fixtures set for completeness before assembly. Additional fixtures are premounted to the product’s screw holes and must be loosened for the appropriate assembly step. Hexagon socket screw M8x20 Hexagon socket screw M8x20...
5. ASSEMBLY INSTRUCTIONS Take all parts out of the packaging carefully and place them on a flat surface. When doing this, use suitable padding to protect the working surface. Assembly of the individual parts should be carried out by people! Before assembly, check the parts list to verify that all parts are present.
Page 11
5. ASSEMBLY INSTRUCTIONS STEP 2: Attach the cover cap (32) to the support tube (49). Connect the computer cables (3, 48). Insert excess cable into the interior of the front support tube (49). Note: We recommend persons assembling the product. One person can hold the support tube (49) while the other connects the cables (3, 48).
Page 12
5. ASSEMBLY INSTRUCTIONS STEP 3: Insert the swivel uptake (14) into the support tube (49). Fasten the lower swivel rods R/L) to the left axle of the front rod (22). Fasten with sets of hex screws (9), bent washers (16) and spring washers (20). Now tighten the hex screws (9). Caution! Please note the following when assembling the swivel rods R/L): •...
Page 13
5. ASSEMBLY INSTRUCTIONS STEP 4: Fasten the pedal tubes L/R) to the left and right crank (59). Fasten with sets of hex screws (9), bent washers (16) and spring washers (20). Place on the cover caps (92). Secure with round-head screws (36). Place the pedal tubes L/R) next to the lower tubes (104).
Page 14
5. ASSEMBLY INSTRUCTIONS STEP 5: " 34 17 1.+2. Connect the pedal rods L/R) to the lower pedal tubes L/R). mounting plate (102) is needed each for the left and right side. Secure with sets of hex screws (68), washers (53,112) and nuts (75) [see Illustration 1/2].
Page 15
5. ASSEMBLY INSTRUCTIONS STEP 6: Mount the pedals L/R) to the pedal rods L/R). Secure with hex screws (66).
Page 16
5. ASSEMBLY INSTRUCTIONS STEP 7: Loosen the screws (2) on the back of the computer (4). Connect the computer cables (3, 4). Insert excess cable into the interior of the support tube (49). Fasten the computer with the previously loosened screws (2) to the computer bracket on the support tube (49).
6. USING THE COMPUTER DOWN BODY START PULSE ENTER RECOVERY STOP CONTROLS/ FUNCTION CONNECTIONS START/STOP button • Quick start function for starting the computer without selecting a program in manual mode. • Stop the workout mode. • Start the workout. UP button •...
Page 18
6. USING THE COMPUTER CONTROL VIA CARIOFIT APP • You can connect the computer via Bluetooth® with your smartphone/tablet. Please download the “Cardiofit” app from the Google Play Store for Android or the Apple App Store for iOS. IMPORTANT DISPLAY INDICATIONS TIME Shows workout time in minutes and seconds.
Page 19
6. USING THE COMPUTER PROGRAMS PRESET PROGRAMS Programs P2 toP13 are preset programs. • You can exercise with different resistance levels and different intervals as shown in the picture on the next page. PROGRAMS PRESET PROGRAMS P2 toP13 Programs are preset programs.
Page 20
6. USING THE COMPUTER PROGRAMS USER PROGRAMS Programs P14 toP17 are programs the user can set. • You can adjust the time, distance and calorie values as well as select one of different resistance levels. The system will save all entered values and profiles for you to recall later. •...
Page 21
6. USING THE COMPUTER PROGRAMS HEART RATE PROGRAMS Programs are programs controlled by your heart rate, and program is the target heart rate program. • When using one of these programs, the computer will adjust the resistance level based on the measured heart rate.
Page 23
6. USING THE COMPUTER PROGRAM WATT PROGRAM When using program P23, the resistance level cannot be adjusted during the workout, but the computer adjusts the resistance automatically based on the speed. When reducing the speed, the resistance will automatically increase. When increasing the speed, the resistance will automatically decrease.
Page 24
6. USING THE COMPUTER PROGRAM BODY FAT TEST PROGRAM Program is a special program for determining a specific stress profile based on the body fat values of the user. Use the UP/DOWN buttons to select program P24; confirm with ENTER. Use the UP/DOWN buttons to adjust the values for size, weight, gender (1-male, 0-female) and age.
Page 25
6. USING THE COMPUTER ERROR MESSAGES Display Cause (ERROR 1) The computer does not receive any position signal from the actuator (67), or the movement of the motor has been blocked. • Check the wiring of the product for any damage or jamming. •...
7. TROUBLESHOOTING Problem Solution No computer display Check the connection to the power supply. Check all cables leading to the computer. Incorrect computer display Check the connection to the power supply. No pulse display (“P” Check the cable connection leading to the handlebar. shown in display).
Our service team is naturally available at any time to assist you with additional questions regarding the assembly and use of your SportPlus product as well as ordering spare parts. Service time:...
11. WARRANTY SportPlus guarantees that the product under warranty has been manufactured from the highest quality materials and has been checked with the utmost care. Should there be any defects within the hereinafter stipulated warranty period and under normal use and maintenance conditions, please contact our service team.
Need help?
Do you have a question about the SP-ET-7000-iE and is the answer not in the manual?
Questions and answers