Daily Maintenance - We Fengmi Technology Mi Laser Projector 150" User Manual

Daily Maintenance

Heat Dissipation Maintenance
Note: Do not touch when the heat
dissipation vent or ventilation hole
reaches approximately 149°F.
Exhaust
19.7 in
Cleaning and Maintenance
Ensure that the projector casing and lens is given a regular, light clean using the cleaning
cloth that comes with the device or a professional grade cleaning cloth. Do not use any
abrasive cleaners, solvents or other rough chemicals to avoid scratches to the surface of
the chassis or glass cover.
Note:
- This projector is not water resistant. Do not allow liquids to penetrate the projector, particularly the
power indicator, glass cover, heat dissipation vent, ports and microphone holes, and such other
locations.
- Ensure that the cleaning cloth that comes with the machine or a professional grade cleaning cloth is
used to clean the glass.
- Ensure that the projector is turned off and the power cord is removed before cleaning the device.
This version is for private use only and should not be distributed.
Note:
Do not allow any item to be
placed within 19.7 in of the
project's heat dissipation vent
Inlet
to avoid obstructing the heat
dissipation.
19.7 in
18