Maintenance - HoMedics VBR-100-2 Instruction Manual And Warranty Information

Instructions for Use
For Use in Home or Office
Plug adapter into a 120 volt AC outlet and plug the receptacle end into the input
jack, located in the bottom of the integrated control on the cushion. Attach the
massage cushion to any chair for a luxurious massage as you read, rest or even
work.

Maintenance

To Roll
This massage body roll incorporates a unique strapping system that allows you to
roll the unit for storage. Begin with the pillow portion and roll it inward toward the foot
of the roll (Fig. A). Use the hook and loop strip at the foot to secure the roll (Fig. B).
A
B
4
To Store
Place massager in its box or in a safe, dry, cool place. Avoid contact with sharp
edges or pointed objects which might cut or puncture the fabric surafce.
To Clean
Spot clean with damp cloth.
• Do not immerse in any liquid to clean.
• Never use abrasive cleaners, brushes, gasoline, kerosene, glass/furniture polish
or paint thinner to clean.
• Do not attempt to repair the massager. There are no user serviceable parts.
For service, send the unit to the HoMedics address listed in the warranty
section.
Support Roll
Use behind your
neck, your lumbar, or
under your knees for
comfortable support.
Massaging Motors
Provide relaxing and
invigorating full body
massage.
Note:
Soothing heat feature
will not function without
massage activated.
Control Panel
Press the massage button once for
low intensity massage. Press it again
for high intensity massage. To activate
soothing heat, press the heat button
once. Press the heat button again to
deactivate the heat function. Pressing
the massage button a third time will
turn off the unit.
5