Table of Contents
Advertisement
Troubleshooting
Temperature
is showing dashes
Inaccurate
temperature
Display screen
not working
If your AcuRite product does not operate properly after trying
the troubleshooting steps, visit www.AcuRite.com or email
support@chaney-inst.com for assistance.
• Relocate the display and/or the sensors.
• The units must be within 75 ft (23 m) of each other.
• Flashing of the temperature is generally an indication
of wireless interference. Perform a hard reset to gain
a strong connection between the units:
1. Bring all 3 units together, side-by-side.
2. Remove all batteries from all 3 units.
3. Reinstall batteries in thermometer display first.
4. Reinstall batteries into sensor #1.
5. Reinstall batteries into sensor #2.
6. The display should read temperatures from
both sensors almost instantly.
• Use standard alkaline batteries (or lithium batteries in
sensor when temperature is below -4ºF/-20ºC). Do not
use heavy duty or rechargeable batteries.
• Check that the batteries are installed correctly.
Batteries may need to be replaced.
• Reset display by pressing the RESET button, located
on the back of the display.
• Verify youʼre within the measurable temperature
range (-40.0ºF to 99.0ºF; -40.0ºC to 37.2ºC).
7
Hide quick links:
Advertisement
Table of Contents
