Breville the Vac Q BBL002 Series Instruction Book page 7

4. Press the POWER Button to turn on the
Vacuum Pump. Vacuum Pump will
automatically stop once a vacuum
pressure is reached.
5. Remove Vacuum Pump from blender lid.
6. Operate blender as per manual.
7. Press the Vacuum Valve to release
vacuum pressure from blender jug for
easy removal of blender lid.
The Inner Cap with Vacuum Valve can
now be left in the blender lid for any
blending tasks, whether it be Vacuum-
Blending or Non-Vacuum Blending.
WARNING
Always wait until the Vacuum Pump has
stopped before turning on the blender.
Do not blend any ingredients while the
Vacuum Pump is operating, as this could cause
damage to the pump.
LIGHTS AROUND POWER BUTTON
A white LED ring will be visible around the
Power Button when Vacuum Pump is in
operation.
If the battery becomes low, the LED ring will
flash in red for 5 seconds after vacuuming.
In this case the Vacuum Pump won't be able
to achieve vacuum pressure anymore. Please
change all 4 batteries and dispose of the old
ones.
7