First Use - AEG A83400HLW0 User Manual

8 www.aeg.com
(several times if necessary) until the
corresponding icon appears
2. Confirm the choice by pressing the
OK button within few seconds.
You will hear the buzzer and the
remain on the display.
This function stops automatically after 52
hours.
It is possible to deactivate the function at
any time by pressing the Mode button
until the corresponding icon will flash
and then the OK button.
3.8 ChildLock function
1. The Child Lock function is activated
by pressing the Mode button (several
times if necessary).
The corresponding icon appears
2. Confirm the choice by pressing the
OK button within a few seconds.
You will hear the buzzer and the icon
remains lighted. In this condition any
possible operation through the keys
does not cause any change as long as
this function is activated.
It is possible to de-activate the function
at any time by pressing the Mode button
until the corresponding icon will flash
and then the OK button.
3.9 DrinksChill function
The DrinksChill function is to be used as
a safety warning when placing bottles in
the freezer compartment.
1. Activate by pressing the Mode
button (several times if necessary)
until the corresponding icon appears
.
2. Confirm the choice by pressing the
OK button within a few seconds.
You will hear the buzzer and the icon
appears.

4. FIRST USE

4.1 Cleaning the interior
Before using the appliance for the first
time, the interior and all internal
accessories should be washed with
lukewarm water and some neutral soap
3. Press the Temperature regulation
button to change the timer value
.
from default 30 min.
The timer can be changed from 1 to
90 min.
will
At the end of the selected time there are
the following indications:
• on the indicator
flashing;
• the icon
• the icon
• sounding of an acoustic alarm until
the OK button is pressed.
At this point bear in mind to remove the
drinks contained in the freezer
compartment.
It is possible to deactivate the function at
any time by pressing the Mode button
.
until the corresponding icon will flash
and then the OK button.
3.10 EcoMode function
In this condition the chosen
temperatures are automatically set
(-18°C) for the best conditions for storing
food.
1. The EcoMode function is activated
by pressing the Mode button (several
times if necessary) or setting the
temperature at -18°C.
The corresponding icon appears
2. You must confirm the choice by
pressing the OK button within a few
seconds.
You will hear the buzzer and the icon
remains lighted.
It is possible to de-activate the function
at any time by changing the selected
temperature in the compartment.
to remove the typical smell of a brand-
new product, then dried thoroughly.
CAUTION!
Do not use detergents or
abrasive powders, as these
will damage the finish.
the symbol
flashing;
flashing;
.