Subscribe to Our Youtube Channel
Summary of Contents for HETCH SVC-1406-HC
- Page 1 HETCH Vacuum & Steam Mop (user manual) Vacuum & Steam Mop Model No. : SVC-1406-HC Size : 160 x 105mm Paper : 230gsm Art Card (cover matt laminate)
- Page 2 . Important Safety Instructions . Parts Identification . Operation Instruction . Care & Maintenance . Troubleshooting . Specifications . Warranty Card Page : 2...
-
Page 3: Important Safety Instructions
A. IMPORTANT SAFETY INSTRUCTIONS Read all instructions before using When using an electrical appliance, basic safety precautions should always be followed, including the following: Vacuum cleaner is an electric appliance, it must be used in accordance with the conditions of the manual, the manual must be properly preserved for future reference. - Page 4 A. IMPORTANT SAFETY INSTRUCTIONS Please do not use the vacuum cleaner in the following situations : A. Vacuum appears damaged or cannot run smoothly. B. Power cord breakage. Avoid blocking the suction inlet to avoid motor damage and heating deformation. This product’s power line and motor is using Y type connection, if the power line is damaged, special equipment is required to replace it, or you can call our professional maintenance department to repair it.
-
Page 5: Parts Identification
B. PARTS IDENTIFICATION 1. Handgrip 2. Steam trigger 3. Control setting panel 4. Power cord hook 5. Main body 6. Steam handle fixing screw 7. Power cord 8. Upper chamber 9. Lower chamber 10. Brush lock 11. Brush 12. Steamboost tray 13. - Page 6 C. OPERATION INSTRUCTION Install before using : A. Open the package, take out the machine, insert the handle in to the machine, and tighten the screw. B. Insert the brush into the machine till hear sound of “ka”, that indicates the brush was installed. Page : 6...
- Page 7 C. OPERATION INSTRUCTION 1. Turn the power cord hook cord on the handle to release power. 2. Take off the water compartment and open the cover, filling with water, then put the cover back and tighten it! 3. Insert the water compartment aligning the water inlet, push the water compartment to host slowly, till hear a sound of “ka”, it indicates the water compartment has been installed in place.
- Page 8 C. OPERATION INSTRUCTION 4. Keep the brush aligning the interface of the machine, insert it slowly till hear a sound of ”ka”, it indicates that brush was installed well. 5. Align the semicircle concave of the steamboost tray and the semicircle convex of brush, then gently press the steamboost tray till you hear a “bang”...
- Page 9 C. OPERATION INSTRUCTION Vacuum switch Steam switch (High) Steam switch (Low) Indicator light Steam trigger 7.1. Steam (Low) - Low Steam use on delicate floors or for light, everyday cleaning. To turn steam on, press steam switch once. Press again steam switch to turn off. Can be used simultaneously with the vacuum function or separately as a steam mop only.
- Page 10 C. OPERATION INSTRUCTION 8. Turn off all controls, switch off power supply, remove the plug from socket. 9. Rewind the power cord to the power cord hook, and make it upright stand in storage place. Page : 10...
- Page 11 C. OPERATION INSTRUCTION 10. Revolve the dust container in a clockwise direction to the end then remove the dust container. The dust container switch 11. Open the dust container cover to pour out the dust. 12. Press the water compartment release button to release water compartment.
- Page 12 C. OPERATION INSTRUCTION 13. Press the brush lock to remove the brush. 14. Treading softly the prominent semicircle of the steamboost tray, pull up the machine till hearing a sound of “ka”, the steamboost tray release. 15. Removed the microfiber mop pad from the steamboost tray. Page : 12...
- Page 13 C. OPERATION INSTRUCTION 16. The carpet glider use : when clean the carpet with carpet glider is more easier and quicker to clean. 17. When in using, ensure the dust container was fixed well with the HEPA filter, and that the dust container is installed in place. Page : 13...
-
Page 14: Care And Maintenance
D. CARE & MAINTENANCE Removing microfiber mop pad : 1.Unplug vacuum and steam mop from electrical outlet. 2.Step on foot release for steamboost tray and lift unit off tray. 3.Carefully remove microfiber mop from the steamboost tray using the semicircle tab. The microfiber mop pad and steamboost tray may be hot. 4.The microfiber mop pad can be machine washed in warm water. - Page 15 D. CARE & MAINTENANCE Cleaning vacuum filter: HEPA lter 1.Turn power off and unplug unit. 2.Remove the dust container from the unit, as directed above. Cyclonic steel lter 3.Remove filter and tap firmly against the inside of a trash bin, removing any visible dirt.
- Page 16 D. CARE & MAINTENANCE Cleaning brush: 1.To clean the brush, press the brush lock on the back of the pivot joint and pull the brush to release it from the appliance. Brush lock 2.Wash bottom of brush with cold water. Brush 3.Look for any clogging in the steam nozzle.
-
Page 17: Troubleshooting
E. TROUBLESHOOTING Problem Possible Causes Solutions Vacuum cleaner has low suction Dust container is full Empty dust container. Position dust container correctly and Dust container is not installed turn dust container switch to the right properly until it is in the center of the unit. Brush is loose Make sure brush is fully inserted into body of unit. -
Page 18: Specifications
F. SPECIFICATIONS Model SVC-1406-HC Rated Voltage 220-240V Rated Frequency 50/60Hz Max. Rated Power 1550W Heating Power 1000W Motor Power 550W Dust Container Capacity 1.2L Water Compartment Capacity 380ML Net Weight 4.16KG Page : 18... - Page 19 Page : 19...
- Page 20 Page : 20...
- Page 21 perforation line Page : 21...
- Page 22 perforation line Page : 22...
- Page 23 Page : 23...
- Page 24 SVC-1406-HC Page : 24...
Need help?
Do you have a question about the SVC-1406-HC and is the answer not in the manual?
Questions and answers