Advertisement
OPERATING INSTRUCTIONS
4. Connection
Black Clip to -
BEFORE PLUGGING THE UNIT INTO THE MAINS
Red Clip to +
SUPPLY FOLLOW THESE INSTRUCTIONS FIRST
Connect the positive charging lead (red) to the positive
terminal post of the battery (marked P or +). Connect the
negative charging lead (black) to the negative terminal
Dia. 2
post of the battery (marked N or -).
Important
Make sure both crocodile clips are making good contact with their respective terminal posts.
Note: Terminal post may be cleaned with a clean cloth
5. Charging
You are now ready to charge your battery. Plug the battery charger into the mains supply and
charging will commence. The LED indicators will clearly show the charging status. When only
the 100% and MAX LED's are still lit charging is complete. Then:
1. Switch off the mains supply.
2. Unplug the charger.
3. Disconnect the charging leads from the battery terminals.
4. Inspect the liquid levels in each battery cell and top up if necessary.
5. Replace the cell caps.
6. Wipe up any surplus liquid (take extreme care and wear disposable rubber gloves as liquid
may be acidic).
7. Replace battery if it has been removed from the vehicle.
Note: Do not attempt to charge batteries with damaged cells.
- 4 -
Advertisement
