Connecting To An Audio System - SpectronIQ PHT-300X User Manual

OMPHT300X-1.book Page 8 Thursday, August 10, 2006 8:19 PM
Connecting to Other Devices

Connecting to an Audio System

There are several different outputs that can be used to connect to an external audio system: 5.1
channel analog, stereo analog, and digital.
To connect to an audio system using 5.1 channel
analog audio:
1. Use the three included speaker cables (see the
accessories on page 2) to connect the 5.1 channel
audio jacks on the rear of the player (from top left to
bottom right: SR—side right, SUB—subwoofer, FR—
front right, SL—side left, CEN—center, and FL—front
left) to the corresponding inputs on the audio
system.
Note: If you are using the 5.1 channel audio
outputs to connect to a separate audio
system, you cannot use the included speaker
system.
To connect to an audio system using stereo analog
audio:
Use two RCA cables to connect the AUDIO jacks on the
rear of the player to a stereo input on the audio system.
To connect to an audio system using coaxial digital
audio:
1. Use a digital coaxial cable to connect the orange
coaxial output (to the right of the AUDIO jacks) on
the player to a coaxial S/PDIF audio input on the
audio system.
2. Select the appropriate Digital Output setting under
the More Aud setup menu on the player (see
"Configuring the Player" on page 23).
To connect to an audio system using optical digital
audio:
1. Use a TOSLINK™ cable to connect the OPTICAL
output on the player to an optical S/PDIF audio input
on the audio system.
2. Select the appropriate Digital Output setting under
the More Aud setup menu on the player (see
"Configuring the Player" on page 23).
AUDIO SYSTEM
SL CEN FL Y Pb/Cb
AUDIO SYSTEM
SL CEN FL Y Pb/Cb
AUDIO SYSTEM
COAXIAL DIGITAL
AUDIO INPUT
SL CEN FL Y Pb/Cb
AUDIO SYSTEM
OPTICAL DIGITAL
AUDIO INPUT
SL CEN FL Y Pb/Cb
8
5.1 CHANNEL
AUDIO INPUT
SR SL
SUB CEN
FR FL
Pr/Cr S-VIDEO OPTICAL OUTPUT
STEREO
AUDIO INPUT
L
R
Pr/Cr S-VIDEO OPTICAL OUTPUT
Pr/Cr S-VIDEO OPTICAL OUTPUT
Pr/Cr S-VIDEO OPTICAL OUTPUT