Installing The Drain Hose - Akai AK-8KGFLW Instruction Manual

Installation (Cont.)

Installing the drain hose

• Do not kink or protract the drain hose.
• Position the drain hose properly in order to prevent water spillage onto the floor
and potential damage.
• Never immerse the end of the drain hose in water.
The drain hose is installed at the back of the machine. For drainage of the washing
water, you can install the other end of the hose three different ways, as illustrated:
• Lead the drain hose into a drain spout (Fig. 8).
• Affix the drain hose into a branch drain pipe of the laundry sink (Fig. 9).
• Lead the drain hose into a sink/basin, using the drain hose support at the back of
the machine, and secure it with a rope or tie (Fig. 10). To ensure proper drainage
when the washing machine is in use, the height of the drain hose must not be higher
than 120cm above ground.
Fig. 8
• When the washing machine is not in use, you may leave the drain hose at the back
of the machine, using the hose clips to keep it in place.
• If the drain hose is too long, do not force it into the washing machine as it will cause
abnormal noise.
• Never lay down the drain hose as water will be discharged.
• Be sure the drain hose is properly routed so it will not kink or lift off the sink.
• Leave the drain hose affixed to the back of the machine; do not remove the hose
buckles.
12
Drain
spout
Fig. 10
(AU) 1300 886 649 (NZ) 0800 836 761 |
WARNING!
Fig. 9
Basin
WARNING!
After Sales Support
Max. 120cm
info@tempo.org