Kalorik M 21847 Operating Instructions Manual page 6

Fax +1 305 430 9692
Use with support and bowl
Check that the speed switch is on « 0 » position and that the
•
appliance is unplugged.
Insert the dough hooks / beaters in the openings situated
•
underneath the appliance (see "
its support").
Once the beaters or the dough hooks are
•
placed, stand the appliance on its support.
To do so, press the bracket release button
and rotate the support so that it is in a
« vertical » position.
Then hold the appliance parallel to the
•
support and slide the appliance in the
support.
Then push slightly on the appliance
•
perpendicularly to the support. When you
hear a "click", it means the appliance is
correctly placed. Check that it is well
placed by lifting it up gently.
Pay attention to the power cable. It should
•
be placed correctly in the space foreseen
to that effect.
Place the bowl on its support and check
•
that it is in a good position.
Press the bracket release button to put the
•
support and the appliance horizontally in
order to immerse the accessories in the
bowl.
Copies of the I/B. Please reproduce them without any
changes except under
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
what is inside the frame.
U
sing the appliance without
6
Assembly page 6/28
special instruction from Team
Print only
USK M 21847 - 120501